Dockerfile

@@ -1,6 +1,44 @@
 # Build time variables
 
-ARG SRCIMAGE=debian:trixie-slim
+ARG SRCIMAGE=debian:bookworm-slim
+
+
+FROM  $SRCIMAGE AS builder
+
+ARG LSMB_VERSION="1.12.5"
+ARG LSMB_DL_DIR="Releases"
+ARG ARTIFACT_LOCATION="https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz"
+
+
+RUN set -x ; \
+  DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -q -y dist-upgrade && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install dh-make-perl libmodule-cpanfile-perl git wget && \
+  apt-file update
+
+RUN set -x ; \
+  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "$ARTIFACT_LOCATION" && \
+  tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
+  rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
+  cd /srv/ledgersmb && \
+  ( ( for lib in $( cpanfile-dump --with-all-features --recommends --no-configure --no-build --no-test ) ; \
+    do \
+      if dh-make-perl locate "$lib" 2>/dev/null ; \
+      then  \
+        : \
+      else \
+        echo no : $lib ; \
+      fi ; \
+    done ) | grep -v dh-make-perl | grep -v 'not found' | grep -vi 'is in Perl ' | cut -d' ' -f4 | sort | uniq | tee /srv/derived-deps ) && \
+  cat /srv/derived-deps
+
+
+#
+#
+#  The real image build starts here
+#
+#
+
 
 FROM  $SRCIMAGE
 LABEL org.opencontainers.image.authors="LedgerSMB project <devel@lists.ledgersmb.org>"
@@ -13,12 +51,20 @@ LABEL org.opencontainers.image.description="LedgerSMB is a full featured double-
  the LedgerSMB project is to bring high quality ERP and accounting capabilities\
  to Small and Midsize Businesses."
 
-ARG LSMB_VERSION="1.13.0-beta1"
-ARG ARTIFACT_PATH="https://download.ledgersmb.org/f/Releases/$LSMB_VERSION/"
+ARG LSMB_VERSION="1.12.5"
+ARG LSMB_DL_DIR="Releases"
+ARG ARTIFACT_LOCATION="https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz"
 
 
-# ARTIFACT_PATH is used to work around pre-1.13 Dockerfiles requiring
-# the ARTIFACT_LOCATION to point to the artifact, not to its path
+# Install Perl, Tex, Starman, psql client, and all dependencies
+# Without libclass-c3-xs-perl, performance is terribly slow...
+
+# Installing psql client directly from instructions at https://wiki.postgresql.org/wiki/Apt
+# That mitigates issues where the PG instance is running a newer version than this container
+
+
+COPY --from=builder /srv/derived-deps /tmp/derived-deps
+
 RUN set -x ; \
   echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
   mkdir -p /usr/share/man/man1/ && \
@@ -32,17 +78,31 @@ RUN set -x ; \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y dist-upgrade && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y install \
-    wget curl ca-certificates libio-socket-ssl-perl postgresql-common && \
+    wget ca-certificates gnupg iproute2 \
+    $( cat /tmp/derived-deps ) \
+    libclass-c3-xs-perl \
+    texlive-plain-generic texlive-latex-recommended texlive-fonts-recommended \
+    texlive-xetex fonts-liberation \
+    lsb-release postgresql-common && \
   /usr/share/postgresql-common/pgdg/apt.postgresql.org.sh -y && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y install postgresql-client && \
-  cd /srv && \
-  curl -s -o ledgersmb-installer -L https://get.ledgersmb.org/ledgersmb-installer && \
-  ARTIFACT_LOCATION="$ARTIFACT_PATH" perl ledgersmb-installer install --yes --log-level=trace $LSMB_VERSION && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install git cpanminus make gcc libperl-dev && \
+  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "$ARTIFACT_LOCATION" && \
+  tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
+  rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
+  cpanm --metacpan --notest \
+    --with-feature=starman \
+    --with-feature=latex-pdf-ps \
+    --with-feature=openoffice \
+    --installdeps /srv/ledgersmb/ && \
+  DEBIAN_FRONTEND="noninteractive" apt-get purge -q -y git cpanminus make gcc libperl-dev && \
+  DEBIAN_FRONTEND="noninteractive" apt-get autoremove -q -y && \
+  DEBIAN_FRONTEND="noninteractive" apt-get clean -q && \
   rm -rf ~/.cpanm/ /var/lib/apt/lists/* /usr/share/man/*
 
-WORKDIR /srv/ledgersmb
 
+WORKDIR /srv/ledgersmb
 
 # master requirements
 
@@ -68,7 +128,7 @@ COPY start.sh /usr/local/bin/start.sh
 COPY config.sh /usr/local/bin/config.sh
 COPY run.sh /usr/local/bin/run.sh
 
-RUN chmod +x /usr/local/bin/start.sh /usr/local/bin/config.sh /usr/local/bin/run.sh && \
+RUN chmod +x /usr/local/bin/start.sh && \
   mkdir -p /var/www && \
   mkdir -p /srv/ledgersmb/local/conf && \
   chown -R www-data /srv/ledgersmb/local

README.md

@@ -58,8 +58,6 @@ to add the TLS layer by applying Nginx or Apache as reverse proxy.
 Enabling optional functionalities such as outgoing e-mail and printing
 could require additional setup of a mail service or CUPS printer service.
 
-❌ Do not use unofficial or AI-generated Docker Compose examples. These are often incomplete, break silently, or skip required services.
-
 # How to use this image
 
 This image can be installed either automatically with the Docker compose file

config.sh

@@ -35,7 +35,7 @@ fi
 if [[ -n "$SSMTP_USE_STARTTLS" ]]; then
     echo "\$SSMTP_USE_STARTTLS set; parameter is deprecated"
     if [[ -z "$LSMB_MAIL_SMTPTLS" ]]; then
-        echo "  Deriving \$LSMB_MAIL_SMTPTLS setting from \$SSMTP_USE_STARTTLS"
+        echo "  Deriving \$LSMB_MAIL_SMTPSENDER_HOSTNAME setting from \$SSMTP_USE_STARTTLS"
         LSMB_MAIL_SMTPTLS=$SSMTP_USE_STARTTLS
     fi
     LSMB_HAVE_DEPRECATED=1
@@ -159,10 +159,4 @@ EOF
   fi
 fi
 
-LSMB_CONFIG_FILE=${LSMB_CONFIG_FILE:-./local/conf/ledgersmb.yaml}
-export LSMB_CONFIG_FILE
-echo "--------- LEDGERSMB CONFIGURATION:  $LSMB_CONFIG_FILE"
-cat ${LSMB_CONFIG_FILE}
-echo '--------- LEDGERSMB CONFIGURATION --- END'
-
 exit 0

run.sh

@@ -1,6 +1,11 @@
 #!/bin/bash
 
 cd /srv/ledgersmb
+LSMB_CONFIG_FILE=${LSMB_CONFIG_FILE:-./local/conf/ledgersmb.yaml}
+export LSMB_CONFIG_FILE
+echo '--------- LEDGERSMB CONFIGURATION:  ledgersmb.conf'
+cat ${LSMB_CONFIG_FILE}
+echo '--------- LEDGERSMB CONFIGURATION --- END'
 
 # ':5762:' suppresses an uninitialized variable warning in starman
 # the last colon means "don't connect using tls"; without it, there's a warning

start.sh

@@ -1,6 +1,5 @@
 #!/bin/bash
 
-home_dir="$(dirname $(readlink -f $BASH_SOURCE))"
-"$home_dir/config.sh" || { echo "Failed configuration" ; exit 1 }
-
+home_dir="$(dirname `readlink -f $BASH_SOURCE`)"
+"$home_dir/config.sh" || (echo "Failed configuration" ; exit)
 exec "$home_dir/run.sh"