* Automatic Dockerfile update by release process

Dockerfile

@@ -1,9 +1,53 @@
-FROM        debian:stretch-slim
+# Build time variables
+
+ARG SRCIMAGE=debian:stretch-slim
+
+
+FROM  $SRCIMAGE AS builder
+
+ARG LSMB_VERSION="1.7.37"
+ARG LSMB_DL_DIR="Releases"
+ARG ARTIFACT_LOCATION="https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz"
+
+
+RUN set -x ; \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y upgrade && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y install dh-make-perl libmodule-cpanfile-perl git wget && \
+  apt-file update
+
+RUN set -x ; \
+  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "$ARTIFACT_LOCATION" && \
+  tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
+  rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
+  cd /srv/ledgersmb && \
+  ( ( for lib in $( cpanfile-dump --with-all-features --recommends --no-configure --no-build --no-test ) ; \
+    do \
+      if dh-make-perl locate "$lib" 2>/dev/null ; \
+      then  \
+        : \
+      else \
+        echo no : $lib ; \
+      fi ; \
+    done ) | grep -v dh-make-perl | grep -v 'not found' | grep -vi 'is in Perl ' | cut -d' ' -f4 | sort | uniq | tee /srv/derived-deps ) && \
+  cat /srv/derived-deps
+
+
+#
+#
+#  The real image build starts here
+#
+#
+
+
+FROM  $SRCIMAGE
 MAINTAINER  Freelock john@freelock.com
 
+
 # Build time variables
-ARG LSMB_VERSION="1.7.9"
+ARG LSMB_VERSION="1.7.37"
 ARG LSMB_DL_DIR="Releases"
+ARG ARTIFACT_LOCATION="https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz"
 
 # Install Perl, Tex, Starman, psql client, and all dependencies
 # Without libclass-c3-xs-perl, performance is terribly slow...
@@ -16,12 +60,11 @@ ARG LSMB_DL_DIR="Releases"
 # Installing psql client directly from instructions at https://wiki.postgresql.org/wiki/Apt
 # That mitigates issues where the PG instance is running a newer version than this container
 
-# for Buster, add:
+
-#    libhtml-escape-perl \
+COPY --from=builder /srv/derived-deps /tmp/derived-deps
-#    libplack-middleware-builder-conditionals-perl \
+
-#    libplack-request-withencoding-perl \
+RUN set -x ; \
-#libversion-compare-perl
+  echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
-RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
   mkdir -p /usr/share/man/man1/ && \
   mkdir -p /usr/share/man/man2/ && \
   mkdir -p /usr/share/man/man3/ && \
@@ -33,31 +76,10 @@ RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >>
   DEBIAN_FRONTEND="noninteractive" apt-get dist-upgrade -y -q && \
   DEBIAN_FRONTEND="noninteractive" apt-get -y -q install \
     wget ca-certificates gnupg \
-    libcgi-emulate-psgi-perl libconfig-inifiles-perl \
+    $( cat /tmp/derived-deps ) \
-    libdbd-pg-perl libdbi-perl libdata-uuid-perl libdatetime-perl \
-    libdatetime-format-strptime-perl \
-    libio-stringy-perl \
-    libcpanel-json-xs-perl liblist-moreutils-perl \
-    liblocale-maketext-perl liblocale-maketext-lexicon-perl \
-    liblog-log4perl-perl libmime-lite-perl libmime-types-perl \
-    libmath-bigint-gmp-perl libmodule-runtime-perl libmoose-perl \
-    libmoosex-nonmoose-perl libnumber-format-perl \
-    libpgobject-perl libpgobject-simple-perl libpgobject-simple-role-perl \
-    libpgobject-type-bigfloat-perl libpgobject-type-datetime-perl \
-    libpgobject-type-bytestring-perl libpgobject-util-dbmethod-perl \
-    libpgobject-util-dbadmin-perl libplack-perl \
-    libplack-middleware-reverseproxy-perl \
-    libtemplate-perl libtext-csv-perl libtext-csv-xs-perl \
-    libtext-markdown-perl  libxml-simple-perl \
-    libnamespace-autoclean-perl \
-    libfile-find-rule-perl \
-    libtemplate-plugin-latex-perl libtex-encode-perl \
     libclass-c3-xs-perl libclass-accessor-lite-perl \
-    libnet-cidr-lite-perl \
+    texlive-latex-recommended texlive-fonts-recommended \
-    texlive-latex-recommended \
     texlive-xetex fonts-liberation \
-    starman \
-    libopenoffice-oodoc-perl \
     ssmtp \
     lsb-release && \
   echo "deb http://apt.postgresql.org/pub/repos/apt/ $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list && \
@@ -65,7 +87,7 @@ RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >>
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y install postgresql-client && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y install git cpanminus make gcc libperl-dev && \
-  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
+  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "$ARTIFACT_LOCATION" && \
   tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
   rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
   cpanm --notest \

README.md

@@ -1,12 +1,18 @@
 # ledgersmb-docker
+
 Dockerfile for LedgerSMB Docker image
 
 # Supported tags
 
-- `1.6`, `1.6.x`, `latest` - Latest release tarball from 1.6 branch
+- `1.8` - Preview version for the 1.8 branch
-- `1.5`, `1.5.x` - Latest release tarball from 1.5 branch
+- `1.7`, `1.7.x`, `latest` - Latest official release from 1.7 branch
-- `1.4`, `1.4.x` - Latest tagged release of git 1.4 branch
+- `1.6`, `1.6.33` - Last official release from 1.6 branch 
+- `1.5`, `1.5.30` - Last official release from 1.5 branch
+- `1.4`, `1.4.42` - Last official release from 1.4 branch
+- `master` - Master branch from git, unstable
 
+Containers supporting the development process are provided
+through the ledgersmb-dev-docker project. See https://github.com/ledgersmb/ledgersmb-dev-docker/blob/master/README.md#getting-started.
 
 # What is LedgerSMB?
 
@@ -23,9 +29,9 @@ This image is designed to be used in conjunction with a running PostgreSQL
 instance (such as may be provided through a separate image).
 
 This image exposes port 5762 running a Starman HTTP application server. We
-do not recommend exposing this port publicly, because
+do recommend not exposing this port publicly, because
 
-1. The Starman author recommends it
+1. The Starman author recommends not exposing it
 2. We strongly recommend TLS encryption of all application traffic
 
 While the exposed port can be used for quick evaluation, it's recommended
@@ -34,33 +40,45 @@ to add the TLS layer by applying Nginx or Apache as reverse proxy.
 Enabling optional functionalities such as outgoing e-mail and printing
 could require additional setup of a mail service or CUPS printer service.
 
-# Quickstart
+# How to use this image
 
-The quickest way to get this image up and running is by using the
+This image can be installed either automatically with the Docker compose file
-`docker-compose` file available through the GitHub repository at:
+or manually with docker only.
 
-  https://github.com/ledgersmb/ledgersmb-docker/blob/1.7/docker-compose.yml
+## Docker-Compose installation and start
 
-which sets up both this image and a supporting database image for
+This image provides `docker-compose.yml` which can be used to pull related
-production purposes (i.e. with persistent (database) data. The database
+images, install them, establish an internal network for their communications,
-username and password are:
+adjust environment variables, start and stop LedgerSMB. The only instructions
+required, after the optional edition of the file to adjust the environment
+variables, are:
+
+```plain
+ $ docker-compose pull
+ $ docker-compose up
+```
+
+This will set up two containers: (1) a PostgreSQL container with persistent
+storage which is retained between container updates and (2) a LedgerSMB
+container configured to connect to the PostgreSQL container as its database
+server.
+
+The database username and password are:
 
 ```plain
    username: postgres
    password: abc
 ```
 
-The docker-compose file does *not* set up an Nginx or Apache reverse proxy
+From here, follow the steps as detailed in the instructions for
-with TLS 1.2/1.3 support -- a requirement if you want to access your
+[preparing for first use](https://ledgersmb.org/content/preparing-ledgersmb-17-first-use).
-installation over any type of network (and especially the internet).
-
 
 ## Manual installation
 
 This section assumes availability of a PostgreSQL server to attach to the
 LedgerSMB image as the database server.
 
-## Start LedgerSMB
+### Start LedgerSMB
 
 ```plain
  $ docker run -d -p 5762:5762 --name myledger \
@@ -74,7 +92,7 @@ http://localhost:5762/setup.pl and http://localhost:5762/login.pl.
 Below are more variables which determine container configuration,
 like `POSTGRES_HOST` above.
 
-## Set up LedgerSMB
+# Set up LedgerSMB
 
  * Visit http://myledger:5762/setup.pl.
  * Log in with the "postgres" user and the password `abc` as given above -
@@ -130,21 +148,18 @@ affect the performance experience of users.
 
 ## Mail configuration
 
-The docker image uses `ssmtp` to send mail.
+### Before 1.8.0
 
-* `SSMTP_ROOT` (config: `Root`)
+These variables are used to set outgoing SMTP defaults.
+
+* `SSMTP_ROOT` (config: `Root` -- DEPRECATED)
 * `SSMTP_MAILHUB` (config: `Mailhub`)
 * `SSMTP_HOSTNAME` (config: `Hostname`)
 * `SSMTP_USE_STARTTLS` (config: `UseSTARTTLS`)
 * `SSMTP_AUTH_USER` (config: `AuthUser`)
 * `SSMTP_AUTH_PASS` (config: `AuthPass`)
-* `SSMTP_AUTH_METHOD` (config: `AuthMethod`)
+* `SSMTP_AUTH_METHOD` (config: `AuthMethod` -- DEPRECATED)
-* `SSMTP_FROMLINE_OVERRIDE` (config: `FromLineOverride`)
+* `SSMTP_FROMLINE_OVERRIDE` (config: `FromLineOverride` -- DEPRECATED)
-
-These variables are used to set outgoing SMTP defaults.
-
-To set the outgoing email address, set `SSMTP_ROOT` and `SSMTP_HOSTNAME` at
-a minimum.
 
 `SSMTP_MAILHUB` defaults to the default docker0 interface, so if your host is
 already configured to relay mail, this should relay successfully with only
@@ -155,6 +170,25 @@ Use the [ssmtp.conf man
 page](https://www.systutorials.com/docs/linux/man/5-ssmtp.conf/) to look up
 the meaning and function of each of the mail configuration keys.
 
+### 1.8.0 and higher (under development)
+
+As of 1.8.0, the image is based on Debian Buster instead of Debian Stretch;
+with Buster, the `ssmtp` program has been removed from Debian, this image
+had to change strategy. The main application always came with built-in e-mail
+yet with the deprecation, the abilities have expanded.
+
+The following parameters are now supported to set mail preferences:
+
+* `LSMB_MAIL_SMTPHOST`
+* `LSMB_MAIL_SMTPPORT`
+* `LSMB_MAIL_SMTPTLS`
+* `LSMB_MAIL_SMTPSENDER_HOSTNAME`
+* `LSMB_MAIL_SMTPUSER`
+* `LSMB_MAIL_SMTPPASS`
+* `LSMB_MAIL_SMTPAUTHMECH`
+
+
+
 # Troubleshooting/Developing
 
 Currently the LedgerSMB installation is in /srv/ledgersmb

docker-compose.yml

@@ -32,14 +32,8 @@ services:
     networks:
       - internal
       - default
-    # Uncomment the 'ports' section to map the LedgerSMB container port (5762)
+    ports:
-    #  to the host's port of the same number, thus making LedgerSMB
+      - "127.0.0.1:5762:5762"
-    #  available on http://<host-dns-or-ip>:5762/
-    #     SECURITY NOTE: Do this for evaluation purposes only!
-    #       In production, be sure to use SSL/TLS to protect user's passwords
-    #       and other sensitive data
-    # ports:
-    #   - "5762:5762"
     environment:
       # The LSMB_WORKERS environment variable lets you select the number
       # of processes serving HTTP requests. The default number of 2 workers
@@ -58,6 +52,15 @@ services:
       # SSMTP_AUTH_METHOD:
       # SSMTP_USE_STARTTLS:
       # SSMTP_FROMLINE_OVERRIDE:
+      #
+      #
+      # The PROXY_IP environment variable lets you set the IP address
+      # (range) of the reverse proxy used for TLS termination, which forwards
+      # its requests to this container. When this reverse proxy runs on the
+      # Docker host, the default below applies. In case the reverse proxy is
+      # hosted in a separate container, this setting needs to be adjusted.
+      #
+      # PROXY_IP: 172.17.0.1/12
 
 # having the dbdata volume is required to persist our
 # data between PostgreSQL container updates; without

start.sh

@@ -16,6 +16,8 @@ default_db = $DEFAULT_DB
 [mail]
 sendmail   = /usr/sbin/ssmtp
 
+[proxy]
+ip=${PROXY_IP:-172.17.0.1/12}
 EOF
   export LSMB_CONFIG_FILE='/tmp/ledgersmb.conf'
 fi