* Automatic Dockerfile update by release process

Dockerfile

@@ -1,78 +1,49 @@
-FROM        debian:stretch-slim
+FROM        debian:jessie
 MAINTAINER  Freelock john@freelock.com
 
 # Build time variables
-ENV LSMB_VERSION 1.6.33
+ENV LSMB_VERSION 1.5.16
 
 
 # Install Perl, Tex, Starman, psql client, and all dependencies
 # Without libclass-c3-xs-perl, performance is terribly slow...
-# Without libclass-accessor-lite-perl, HTML::Entities won't build from CPAN
-# libnet-cidr-lite-perl is a dependency for Plack::Builder::Conditionals
-#   which is being installed from CPAN
-# libtest-requires-perl is a dependency of Module-Build-Pluggable-PPPort
-#   on which HTML::Escape depends
-
-# Installing psql client directly from instructions at https://wiki.postgresql.org/wiki/Apt
-# That mitigates issues where the PG instance is running a newer version than this container
-
 RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
-  mkdir -p /usr/share/man/man1/ && \
+  DEBIAN_FRONTEND=noninteractive apt-get update && \
-  mkdir -p /usr/share/man/man2/ && \
+    apt-get dist-upgrade -y && apt-get -y install \
-  mkdir -p /usr/share/man/man3/ && \
-  mkdir -p /usr/share/man/man4/ && \
-  mkdir -p /usr/share/man/man5/ && \
-  mkdir -p /usr/share/man/man6/ && \
-  mkdir -p /usr/share/man/man7/ && \
-  DEBIAN_FRONTEND="noninteractive" apt-get update -q && \
-  DEBIAN_FRONTEND="noninteractive" apt-get dist-upgrade -y -q && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y -q install \
-    wget ca-certificates gnupg \
     libcgi-emulate-psgi-perl libcgi-simple-perl libconfig-inifiles-perl \
-    libdbd-pg-perl libdbi-perl libdata-uuid-perl libdatetime-perl \
+    libdbd-pg-perl libdbi-perl libdatetime-perl \
-    libdatetime-format-strptime-perl libio-stringy-perl \
+    libdatetime-format-strptime-perl libdigest-md5-perl \
-    libjson-xs-perl libcpanel-json-xs-perl liblist-moreutils-perl \
+    libfile-mimeinfo-perl libjson-xs-perl libjson-perl \
     liblocale-maketext-perl liblocale-maketext-lexicon-perl \
-    liblog-log4perl-perl libmime-lite-perl libmime-types-perl \
+    liblog-log4perl-perl libmime-base64-perl libmime-lite-perl \
-    libmath-bigint-gmp-perl libmodule-runtime-perl libmoose-perl \
+    libmath-bigint-gmp-perl libmoose-perl libnumber-format-perl \
-    libmoosex-nonmoose-perl libnumber-format-perl \
     libpgobject-perl libpgobject-simple-perl libpgobject-simple-role-perl \
-    libpgobject-type-bigfloat-perl libpgobject-type-datetime-perl \
+    libpgobject-util-dbmethod-perl libplack-perl libtemplate-perl \
-    libpgobject-type-bytestring-perl libpgobject-util-dbmethod-perl \
-    libpgobject-util-dbadmin-perl libplack-perl \
-    libplack-middleware-reverseproxy-perl \
-    libtemplate-perl libtext-csv-perl libtext-csv-xs-perl \
-    libtext-markdown-perl libxml-simple-perl \
     libnamespace-autoclean-perl \
-    libimage-size-perl \
     libtemplate-plugin-latex-perl libtex-encode-perl \
-    libclass-c3-xs-perl libclass-accessor-lite-perl \
+    libmoosex-nonmoose-perl libclass-c3-xs-perl \
-    libnet-cidr-lite-perl libtest-requires-perl \
+    texlive-latex-recommended \
-    texlive-latex-recommended texlive-fonts-recommended \
+    texlive-xetex \
-    texlive-xetex fonts-liberation \
     starman \
     libopenoffice-oodoc-perl \
+    postgresql-client \
     ssmtp \
     lsb-release && \
-  echo "deb http://apt.postgresql.org/pub/repos/apt/ $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list && \
+  DEBIAN_FRONTEND=noninteractive apt-get update && \
-  (wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | apt-key add -) && \
+    apt-get -y install git cpanminus make gcc libperl-dev && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
+    curl -Lo /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/Releases/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install postgresql-client && \
+    tar -xvzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install git cpanminus make gcc libperl-dev && \
+    rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
-  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/Releases/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
+    cpanm --quiet --notest \
-  tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
+      --with-feature=starman \
-  rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
+      --with-feature=latex-pdf-ps \
-  cpanm --notest \
+      --with-feature=openoffice \
-    --with-feature=starman \
+      --installdeps /srv/ledgersmb/ && \
-    --with-feature=latex-pdf-ps \
+    apt-get purge -y git cpanminus make gcc libperl-dev && \
-    --with-feature=openoffice \
+    apt-get autoremove -y && \
-    --installdeps /srv/ledgersmb/ && \
+    apt-get autoclean && \
-  apt-get purge -q -y git cpanminus make gcc libperl-dev && \
+    rm -rf ~/.cpanm/ && \
-  apt-get autoremove -q -y && \
+    rm -rf /var/lib/apt/lists/*
-  apt-get autoclean -q && \
-  rm -rf ~/.cpanm/ && \
-  rm -rf /var/lib/apt/lists/* /usr/share/man/*
-
 
 WORKDIR /srv/ledgersmb
 

README.md

@@ -3,10 +3,10 @@ Dockerfile for LedgerSMB Docker image
 
 # Supported tags
 
-- `1.7`, `1.7.x` - Latest official release from 1.7 branch
+- `1.5`, `1.5.x`, `latest` - Latest release tarball from 1.5 branch
-- `1.6`, `1.6.x` - Latest release tarball from 1.6 branch
-- `1.5`, `1.5.x` - Latest release tarball from 1.5 branch
 - `1.4`, `1.4.x` - Latest tagged release of git 1.4 branch
+- `master` - Master branch from git, unstable
+- `master-dev`, `1.5-dev` - Containers to kick off a development setup
 
 
 # What is LedgerSMB?
@@ -35,53 +35,48 @@ to add the TLS layer by applying Nginx or Apache as reverse proxy.
 Enabling optional functionalities such as outgoing e-mail and printing
 could require additional setup of a mail service or CUPS printer service.
 
-# Quickstart
+# How to use this image
 
-The quickest way to get this image up and running is by using the
+## Start a postgres instance
-`docker-compose` file available through the GitHub repository at:
-
-  https://github.com/ledgersmb/ledgersmb-docker/blob/1.7/docker-compose.yml
-
-which sets up both this image and a supporting database image for
-production purposes (i.e. with persistent (database) data. The database
-username and password are:
 
 ```plain
-   username: postgres
+ $ docker run -d --name postgres \
-   password: abc
+              -e POSTGRES_PASSWORD=mysecretpassword \
+              postgres:latest
 ```
 
-The docker-compose file does *not* set up an Nginx or Apache reverse proxy
+BEWARE: The command above creates a container with the database data stored
-with TLS 1.2/1.3 support -- a requirement if you want to access your
+*inside* the container. Upon removal of the container, the database data will
-installation over any type of network (and especially the internet).
+be removed too!
 
+To prevent destruction of the database data upon replacement of the container,
+please use these commands instead:
 
-## Manual installation
+```plain
-
+ $ docker volume create dbdata
-This section assumes availability of a PostgreSQL server to attach to the
+ $ docker run -d --name postgres \
-LedgerSMB image as the database server.
+              -e POSTGRES_PASSWORD=mysecretpassword \
+              -e PGDATA=/var/lib/postgresql/data/pgdata \
+              -v dbdata:/var/lib/postgresql/data \
+              postgres:latest
+```
 
 ## Start LedgerSMB
 
 ```plain
  $ docker run -d -p 5762:5762 --name myledger \
-              -e POSTGRES_HOST=<ip/hostname> ledgersmb/ledgersmb:latest
+              ledgersmb/ledgersmb:latest
 ```
 
 This command maps port 5762 of your container to port 5762 in your host. The
 web application inside the container should now be accessible through
-http://localhost:5762/setup.pl and http://localhost:5762/login.pl.
+http://localhost:5762/setup.pl.
-
-Below are more variables which determine container configuration,
-like `POSTGRES_HOST` above.
 
 ## Set up LedgerSMB
 
  * Visit http://myledger:5762/setup.pl.
- * Log in with the "postgres" user and the password `abc` as given above -
+ * Log in with the "postgres" user and the password `mysecretpassword`
-   or with the credentials of your own database server in case of a manual
+   and provide the name of a company (= database name) you want to create.
-   setup - and provide the name of a company (= database name) you want to
-   create.
  * Go over the steps presented in the browser
 
 Once you have completed the setup steps, you have a fully functional
@@ -121,18 +116,8 @@ Default: lsmb
 Set this if you want to automatically log in to a particular LedgerSMB database
 without needing to enter the name of that database on the login.pl login screen.
 
-## `LSMB_WORKERS`
-
-Default: 5
-
-Set this if you want to run in a memory-constrained environment. E.g. set it to
-2 when running in a 1 GB memory setup. Please do note that this may adversely
-affect the performance experience of users.
-
 ## Mail configuration
 
-The docker image uses `ssmtp` to send mail.
-
 * `SSMTP_ROOT` (config: `Root`)
 * `SSMTP_MAILHUB` (config: `Mailhub`)
 * `SSMTP_HOSTNAME` (config: `Hostname`)
@@ -166,18 +151,11 @@ and the startup & config script is /usr/bin/start.sh.
 
 ## Issues
 
-If you have any problems with or questions about this image or LedgerSMB,
+If you have any problems with or questions about this image or LedgerSMB, please contact us on the [mailing list](http://ledgersmb.org/topic/support/mailing-lists-rss-and-nntp-feeds) or through a [GitHub issue](https://github.com/ledgersmb/ledgersmb-docker/issues).
-please contact us on the [mailing list](http://ledgersmb.org/topic/support/mailing-lists-rss-and-nntp-feeds)
-or through a [GitHub issue](https://github.com/ledgersmb/ledgersmb-docker/issues).
 
-You can also reach some of the official LedgerSMB maintainers via the
+You can also reach some of the official LedgerSMB maintainers via the `#ledgersmb` IRC channel on [Freenode](https://freenode.net), or on the bridged [Matrix](https://matrix.org) room in [#ledgersmb:matrix.org](https://matrix.to/#/#ledgersmb:matrix.org). The [Riot.im](https://riot.im/app/#/room/#ledgersmb:matrix.org) Matrix client is highly recommended.
-`#ledgersmb` IRC channel on [Freenode](https://freenode.net), or on the
-bridged [Matrix](https://matrix.org) room in [#ledgersmb:matrix.org](https://matrix.to/#/#ledgersmb:matrix.org).
-The [Riot.im](https://riot.im/app/#/room/#ledgersmb:matrix.org) Matrix client is highly recommended.
 
 
 ## Contributing
 
-You are invited to contribute new features, fixes, or updates, large or small;
+You are invited to contribute new features, fixes, or updates, large or small; we are always thrilled to receive pull requests, and do our best to process them as fast as we can.
-we are always thrilled to receive pull requests, and do our best to process
-them as fast as we can.

docker-compose.yml

@@ -1,72 +0,0 @@
-# This docker-compose file creates one
-# compose 'project' consisting of two containers
-#
-#  1. The PostgreSQL data  container
-#  2. The LedgerSMB application container
-#
-# LedgerSMB persists all its data in the database,
-# so no special care needs to be taken on
-# container upgrades.  With PostgreSQL, data is
-# persisted across upgrades by the use of a
-# special 'dbdata' volume
-
-version: "3.2"
-services:
-  # Note that the container needs to be named "postgres" here,
-  # because that allows us to use the default hostname ("postgres")
-  # from the LedgerSMB configuration
-  postgres:
-    image: postgres:9.6-alpine
-    environment:
-      # Replace the password below for a secure setup
-      POSTGRES_PASSWORD: abc
-      PGDATA: /var/lib/postgresql/data/pgdata
-    networks:
-      - internal
-    volumes:
-      - "pgdata:/var/lib/postgresql/data"
-  lsmb:
-    depends_on:
-      - postgres
-    image: ghcr.io/ledgersmb/ledgersmb:1.6
-    networks:
-      - internal
-      - default
-    # Uncomment the 'ports' section to map the LedgerSMB container port (5762)
-    #  to the host's port of the same number, thus making LedgerSMB
-    #  available on http://<host-dns-or-ip>:5762/
-    #     SECURITY NOTE: Do this for evaluation purposes only!
-    #       In production, be sure to use SSL/TLS to protect user's passwords
-    #       and other sensitive data
-    # ports:
-    #   - "5762:5762"
-    environment:
-      # The LSMB_WORKERS environment variable lets you select the number
-      # of processes serving HTTP requests. The default number of 2 workers
-      # is geared toward limited-memory situations (1 GB). In order to
-      # improve the performance experience, increase memory and the
-      # number of workers
-      #
-      LSMB_WORKERS: 2
-      #
-      #
-      # SSMTP_ROOT:
-      # SSMTP_HOSTNAME:
-      # SSMTP_MAILHUB:
-      # SSMTP_AUTH_USER:
-      # SSMTP_AUTH_PASS:
-      # SSMTP_AUTH_METHOD:
-      # SSMTP_USE_STARTTLS:
-      # SSMTP_FROMLINE_OVERRIDE:
-
-# having the dbdata volume is required to persist our
-# data between PostgreSQL container updates; without
-# that, the data is contained in the same volume as
-# the rest of the image and on update/upgrade, the
-# data will be lost.
-volumes:
-  pgdata:
-
-
-networks:
-  internal:

start.sh

@@ -45,5 +45,4 @@ echo "Selected PERL5LIB=$PERL5LIB";
 # --preload-app allows application initialization to kill the entire
 # starman instance (instead of just the worker, which will immediately
 # get restarted); it also has a positive effect on memory use
-
+exec starman --port 5762 --preload-app tools/starman.psgi
-exec starman --port 5762 --workers ${LSMB_WORKERS:-5} --preload-app bin/ledgersmb-server.psgi