* Automatic Dockerfile update by release process

Starman is looking for LedgerSMB::PSGI and can't find it due to missing
library paths. Add -I arguments to fix it up.

Dockerfile

@@ -2,8 +2,8 @@ FROM        debian:stretch-slim
 MAINTAINER  Freelock john@freelock.com
 
 # Build time variables
-ENV LSMB_VERSION 1.6.33
+ARG LSMB_VERSION="1.7.4"
-
+ARG LSMB_DL_DIR="Releases"
 
 # Install Perl, Tex, Starman, psql client, and all dependencies
 # Without libclass-c3-xs-perl, performance is terribly slow...
@@ -16,6 +16,11 @@ ENV LSMB_VERSION 1.6.33
 # Installing psql client directly from instructions at https://wiki.postgresql.org/wiki/Apt
 # That mitigates issues where the PG instance is running a newer version than this container
 
+# for Buster, add:
+#    libhtml-escape-perl \
+#    libplack-middleware-builder-conditionals-perl \
+#    libplack-request-withencoding-perl \
+#libversion-compare-perl
 RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
   mkdir -p /usr/share/man/man1/ && \
   mkdir -p /usr/share/man/man2/ && \
@@ -28,10 +33,11 @@ RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >>
   DEBIAN_FRONTEND="noninteractive" apt-get dist-upgrade -y -q && \
   DEBIAN_FRONTEND="noninteractive" apt-get -y -q install \
     wget ca-certificates gnupg \
-    libcgi-emulate-psgi-perl libcgi-simple-perl libconfig-inifiles-perl \
+    libcgi-emulate-psgi-perl libconfig-inifiles-perl \
     libdbd-pg-perl libdbi-perl libdata-uuid-perl libdatetime-perl \
-    libdatetime-format-strptime-perl libio-stringy-perl \
+    libdatetime-format-strptime-perl \
-    libjson-xs-perl libcpanel-json-xs-perl liblist-moreutils-perl \
+    libio-stringy-perl \
+    libcpanel-json-xs-perl liblist-moreutils-perl \
     liblocale-maketext-perl liblocale-maketext-lexicon-perl \
     liblog-log4perl-perl libmime-lite-perl libmime-types-perl \
     libmath-bigint-gmp-perl libmodule-runtime-perl libmoose-perl \
@@ -42,13 +48,13 @@ RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >>
     libpgobject-util-dbadmin-perl libplack-perl \
     libplack-middleware-reverseproxy-perl \
     libtemplate-perl libtext-csv-perl libtext-csv-xs-perl \
-    libtext-markdown-perl libxml-simple-perl \
+    libtext-markdown-perl  libxml-simple-perl \
     libnamespace-autoclean-perl \
-    libimage-size-perl \
+    libfile-find-rule-perl \
     libtemplate-plugin-latex-perl libtex-encode-perl \
     libclass-c3-xs-perl libclass-accessor-lite-perl \
-    libnet-cidr-lite-perl libtest-requires-perl \
+    libnet-cidr-lite-perl \
-    texlive-latex-recommended texlive-fonts-recommended \
+    texlive-latex-recommended \
     texlive-xetex fonts-liberation \
     starman \
     libopenoffice-oodoc-perl \
@@ -59,7 +65,7 @@ RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >>
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y install postgresql-client && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y install git cpanminus make gcc libperl-dev && \
-  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/Releases/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
+  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
   tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
   rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
   cpanm --notest \

README.md

@@ -3,8 +3,6 @@ Dockerfile for LedgerSMB Docker image
 
 # Supported tags
 
-- `1.8` - Preview version for the 1.8 branch
-- `1.7`, `1.7.x`, `latest` - Latest official release from 1.7 branch
 - `1.6`, `1.6.x`, `latest` - Latest release tarball from 1.6 branch
 - `1.5`, `1.5.x` - Latest release tarball from 1.5 branch
 - `1.4`, `1.4.x` - Latest tagged release of git 1.4 branch
@@ -41,48 +39,56 @@ could require additional setup of a mail service or CUPS printer service.
 The quickest way to get this image up and running is by using the
 `docker-compose` file available through the GitHub repository at:
 
-  https://github.com/ledgersmb/ledgersmb-docker/blob/1.7/docker-compose.yml
+  https://github.com/ledgersmb/ledgersmb-docker/blob/1.6/docker-compose.yml
 
 which sets up both this image and a supporting database image for
-production purposes (i.e. with persistent (database) data. The database
+production purposes (i.e. with persistent (database) data, with the
-username and password are:
+exception of one thing: setting up an Nginx or Apache reverse proxy
+with TLS 1.2/1.3 support -- a requirement if you want to access your
+installation over any type of network.
+
+# How to use this image
+
+## Start a postgres instance
 
 ```plain
-   username: postgres
+ $ docker run -d --name postgres \
-   password: abc
+              -e POSTGRES_PASSWORD=mysecretpassword \
+              postgres:latest
 ```
 
-The docker-compose file does *not* set up an Nginx or Apache reverse proxy
+BEWARE: The command above creates a container with the database data stored
-with TLS 1.2/1.3 support -- a requirement if you want to access your
+*inside* the container. Upon removal of the container, the database data will
-installation over any type of network (and especially the internet).
+be removed too!
 
+To prevent destruction of the database data upon replacement of the container,
+please use these commands instead:
 
-## Manual installation
+```plain
-
+ $ docker volume create dbdata
-This section assumes availability of a PostgreSQL server to attach to the
+ $ docker run -d --name postgres \
-LedgerSMB image as the database server.
+              -e POSTGRES_PASSWORD=mysecretpassword \
+              -e PGDATA=/var/lib/postgresql/data/pgdata \
+              -v dbdata:/var/lib/postgresql/data \
+              postgres:latest
+```
 
 ## Start LedgerSMB
 
 ```plain
  $ docker run -d -p 5762:5762 --name myledger \
-              -e POSTGRES_HOST=<ip/hostname> ledgersmb/ledgersmb:latest
+              ledgersmb/ledgersmb:latest
 ```
 
 This command maps port 5762 of your container to port 5762 in your host. The
 web application inside the container should now be accessible through
-http://localhost:5762/setup.pl and http://localhost:5762/login.pl.
+http://localhost:5762/setup.pl.
-
-Below are more variables which determine container configuration,
-like `POSTGRES_HOST` above.
 
 ## Set up LedgerSMB
 
  * Visit http://myledger:5762/setup.pl.
- * Log in with the "postgres" user and the password `abc` as given above -
+ * Log in with the "postgres" user and the password `mysecretpassword`
-   or with the credentials of your own database server in case of a manual
+   and provide the name of a company (= database name) you want to create.
-   setup - and provide the name of a company (= database name) you want to
-   create.
  * Go over the steps presented in the browser
 
 Once you have completed the setup steps, you have a fully functional
@@ -167,18 +173,11 @@ and the startup & config script is /usr/bin/start.sh.
 
 ## Issues
 
-If you have any problems with or questions about this image or LedgerSMB,
+If you have any problems with or questions about this image or LedgerSMB, please contact us on the [mailing list](http://ledgersmb.org/topic/support/mailing-lists-rss-and-nntp-feeds) or through a [GitHub issue](https://github.com/ledgersmb/ledgersmb-docker/issues).
-please contact us on the [mailing list](http://ledgersmb.org/topic/support/mailing-lists-rss-and-nntp-feeds)
-or through a [GitHub issue](https://github.com/ledgersmb/ledgersmb-docker/issues).
 
-You can also reach some of the official LedgerSMB maintainers via the
+You can also reach some of the official LedgerSMB maintainers via the `#ledgersmb` IRC channel on [Freenode](https://freenode.net), or on the bridged [Matrix](https://matrix.org) room in [#ledgersmb:matrix.org](https://matrix.to/#/#ledgersmb:matrix.org). The [Riot.im](https://riot.im/app/#/room/#ledgersmb:matrix.org) Matrix client is highly recommended.
-`#ledgersmb` IRC channel on [Freenode](https://freenode.net), or on the
-bridged [Matrix](https://matrix.org) room in [#ledgersmb:matrix.org](https://matrix.to/#/#ledgersmb:matrix.org).
-The [Riot.im](https://riot.im/app/#/room/#ledgersmb:matrix.org) Matrix client is highly recommended.
 
 
 ## Contributing
 
-You are invited to contribute new features, fixes, or updates, large or small;
+You are invited to contribute new features, fixes, or updates, large or small; we are always thrilled to receive pull requests, and do our best to process them as fast as we can.
-we are always thrilled to receive pull requests, and do our best to process
-them as fast as we can.

start.sh

@@ -20,30 +20,14 @@ EOF
   export LSMB_CONFIG_FILE='/tmp/ledgersmb.conf'
 fi
 
-if [ ! -f "/tmp/ledgersmb" ]; then
+if [ ! -d "/tmp/ledgersmb" ]; then
-  mkdir /tmp/ledgersmb
+  mkdir -p /tmp/ledgersmb
 fi
-# Currently unmaintained/untested
-# if [ ! -z ${CREATE_DATABASE+x} ]; then
-#   perl tools/dbsetup.pl --company $CREATE_DATABASE \
-#   --host $POSTGRES_HOST \
-#   --postgres_password "$POSTGRES_PASS"
-#fi
-
-# Needed for modules loaded by cpanm
-export PERL5LIB
-
-for PerlLib in /usr/lib/perl5* /usr/local/lib/perl5*/site_perl/* ; do
-    [[ -d "$PerlLib" ]] && {
-        PERL5LIB="$PerlLib";
-        echo -e "\tmaybe: $PerlLib";
-    }
-done ;
-echo "Selected PERL5LIB=$PERL5LIB";
 
 # start ledgersmb
 # --preload-app allows application initialization to kill the entire
 # starman instance (instead of just the worker, which will immediately
 # get restarted); it also has a positive effect on memory use
 
-exec starman --port 5762 --workers ${LSMB_WORKERS:-5} --preload-app bin/ledgersmb-server.psgi
+exec starman --port 5762 --workers ${LSMB_WORKERS:-5} -I lib -I old/lib \
+        --preload-app bin/ledgersmb-server.psgi