* Automatic Dockerfile update by release process

Note that we found in the LedgerSMB Matrix chat channel that users
need more straight forward ways to quickly evaluate our proposition
which they are able to offer if we skip the TLS requirement

Also note that the TLS requirement requires a domain, which some
might not have at the stage where the system is only being evaluated.

Dockerfile

@@ -1,26 +1,16 @@
-FROM        debian:stretch-slim
+FROM        debian:jessie-slim
 MAINTAINER  Freelock john@freelock.com
 
 # Build time variables
-ARG LSMB_VERSION="1.7.0-rc1"
+ENV LSMB_VERSION 1.5.25
-ARG LSMB_DL_DIR="Beta Releases"
+
 
 # Install Perl, Tex, Starman, psql client, and all dependencies
 # Without libclass-c3-xs-perl, performance is terribly slow...
-# Without libclass-accessor-lite-perl, HTML::Entities won't build from CPAN
-# libnet-cidr-lite-perl is a dependency for Plack::Builder::Conditionals
-#   which is being installed from CPAN
-# libtest-requires-perl is a dependency of Module-Build-Pluggable-PPPort
-#   on which HTML::Escape depends
 
 # Installing psql client directly from instructions at https://wiki.postgresql.org/wiki/Apt
 # That mitigates issues where the PG instance is running a newer version than this container
 
-# for Buster, add:
-#    libhtml-escape-perl \
-#    libplack-middleware-builder-conditionals-perl \
-#    libplack-request-withencoding-perl \
-#libversion-compare-perl
 RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
   mkdir -p /usr/share/man/man1/ && \
   mkdir -p /usr/share/man/man2/ && \
@@ -29,55 +19,46 @@ RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >>
   mkdir -p /usr/share/man/man5/ && \
   mkdir -p /usr/share/man/man6/ && \
   mkdir -p /usr/share/man/man7/ && \
-  DEBIAN_FRONTEND="noninteractive" apt-get update -q && \
+  DEBIAN_FRONTEND=noninteractive apt-get update && \
-  DEBIAN_FRONTEND="noninteractive" apt-get dist-upgrade -y -q && \
+    apt-get dist-upgrade -y && apt-get -y install \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y -q install \
+    curl wget ca-certificates \
-    wget ca-certificates gnupg \
+    libcgi-emulate-psgi-perl libcgi-simple-perl libconfig-inifiles-perl \
-    libcgi-emulate-psgi-perl libconfig-inifiles-perl \
+    libdbd-pg-perl libdbi-perl libdatetime-perl \
-    libdbd-pg-perl libdbi-perl libdata-uuid-perl libdatetime-perl \
+    libdatetime-format-strptime-perl libdigest-md5-perl \
-    libdatetime-format-strptime-perl \
+    libfile-mimeinfo-perl libjson-xs-perl libjson-perl \
-    libio-stringy-perl \
-    libcpanel-json-xs-perl liblist-moreutils-perl \
     liblocale-maketext-perl liblocale-maketext-lexicon-perl \
-    liblog-log4perl-perl libmime-lite-perl libmime-types-perl \
+    liblog-log4perl-perl libmime-base64-perl libmime-lite-perl \
-    libmath-bigint-gmp-perl libmodule-runtime-perl libmoose-perl \
+    libmath-bigint-gmp-perl libmoose-perl libnumber-format-perl \
-    libmoosex-nonmoose-perl libnumber-format-perl \
     libpgobject-perl libpgobject-simple-perl libpgobject-simple-role-perl \
-    libpgobject-type-bigfloat-perl libpgobject-type-datetime-perl \
+    libpgobject-util-dbmethod-perl libplack-perl libtemplate-perl \
-    libpgobject-type-bytestring-perl libpgobject-util-dbmethod-perl \
-    libpgobject-util-dbadmin-perl libplack-perl \
-    libplack-middleware-reverseproxy-perl \
-    libtemplate-perl libtext-csv-perl libtext-csv-xs-perl \
-    libtext-markdown-perl  libxml-simple-perl \
     libnamespace-autoclean-perl \
-    libfile-find-rule-perl \
     libtemplate-plugin-latex-perl libtex-encode-perl \
-    libclass-c3-xs-perl libclass-accessor-lite-perl \
+    libmoosex-nonmoose-perl libclass-c3-xs-perl \
-    libnet-cidr-lite-perl \
     texlive-latex-recommended \
     texlive-xetex fonts-liberation \
     starman \
     libopenoffice-oodoc-perl \
+    postgresql-client \
     ssmtp \
     lsb-release && \
   echo "deb http://apt.postgresql.org/pub/repos/apt/ $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list && \
   (wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | apt-key add -) && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install postgresql-client && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y install postgresql-client && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install git cpanminus make gcc libperl-dev && \
+  DEBIAN_FRONTEND=noninteractive apt-get -y install git cpanminus make gcc libperl-dev && \
-  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
+    curl -Lo /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/Releases/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
-  tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
+    tar -xvzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
-  rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
+    rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
-  cpanm --notest \
+    cpanm --quiet --notest \
-    --with-feature=starman \
+      --with-feature=starman \
-    --with-feature=latex-pdf-ps \
+      --with-feature=latex-pdf-ps \
-    --with-feature=openoffice \
+      --with-feature=openoffice \
-    --installdeps /srv/ledgersmb/ && \
+      --installdeps /srv/ledgersmb/ && \
-  apt-get purge -q -y git cpanminus make gcc libperl-dev && \
+    apt-get purge -y git cpanminus make gcc libperl-dev && \
-  apt-get autoremove -q -y && \
+    apt-get autoremove -y && \
-  apt-get autoclean -q && \
+    apt-get autoclean && \
-  rm -rf ~/.cpanm/ && \
+    rm -rf ~/.cpanm/ && \
-  rm -rf /var/lib/apt/lists/* /usr/share/man/*
+    rm -rf /var/lib/apt/lists/* /usr/share/man/*
 
 
 WORKDIR /srv/ledgersmb

README.md

@@ -3,9 +3,10 @@ Dockerfile for LedgerSMB Docker image
 
 # Supported tags
 
-- `1.6`, `1.6.x`, `latest` - Latest release tarball from 1.6 branch
+- `1.5`, `1.5.x`, `latest` - Latest release tarball from 1.5 branch
-- `1.5`, `1.5.x` - Latest release tarball from 1.5 branch
 - `1.4`, `1.4.x` - Latest tagged release of git 1.4 branch
+- `master` - Master branch from git, unstable
+- `master-dev`, `1.5-dev` - Containers to kick off a development setup
 
 
 # What is LedgerSMB?
@@ -39,12 +40,12 @@ could require additional setup of a mail service or CUPS printer service.
 The quickest way to get this image up and running is by using the
 `docker-compose` file available through the GitHub repository at:
 
-  https://github.com/ledgersmb/ledgersmb-docker/blob/1.6/docker-compose.yml
+  https://github.com/ledgersmb/ledgersmb-docker/blob/1.5/docker-compose.yml
 
 which sets up both this image and a supporting database image for
 production purposes (i.e. with persistent (database) data, with the
 exception of one thing: setting up an Nginx or Apache reverse proxy
-with TLS 1.2/1.3 support -- a requirement if you want to access your
+with TLS 1.2 support -- a requirement if you want to access your
 installation over any type of network.
 
 # How to use this image

docker-compose.yml

@@ -28,7 +28,7 @@ services:
   lsmb:
     depends_on:
       - postgres
-    image: ledgersmb/ledgersmb:1.6
+    image: ledgersmb/ledgersmb:1.5
     networks:
       - internal
       - default

start.sh

@@ -20,14 +20,29 @@ EOF
   export LSMB_CONFIG_FILE='/tmp/ledgersmb.conf'
 fi
 
-if [ ! -d "/tmp/ledgersmb" ]; then
+if [ ! -f "/tmp/ledgersmb" ]; then
-  mkdir -p /tmp/ledgersmb
+  mkdir /tmp/ledgersmb
 fi
+# Currently unmaintained/untested
+# if [ ! -z ${CREATE_DATABASE+x} ]; then
+#   perl tools/dbsetup.pl --company $CREATE_DATABASE \
+#   --host $POSTGRES_HOST \
+#   --postgres_password "$POSTGRES_PASS"
+#fi
+
+# Needed for modules loaded by cpanm
+export PERL5LIB
+
+for PerlLib in /usr/lib/perl5* /usr/local/lib/perl5*/site_perl/* ; do
+    [[ -d "$PerlLib" ]] && {
+        PERL5LIB="$PerlLib";
+        echo -e "\tmaybe: $PerlLib";
+    }
+done ;
+echo "Selected PERL5LIB=$PERL5LIB";
 
 # start ledgersmb
 # --preload-app allows application initialization to kill the entire
 # starman instance (instead of just the worker, which will immediately
 # get restarted); it also has a positive effect on memory use
-
+exec starman --port 5762 --workers ${LSMB_WORKERS:-5} --preload-app tools/starman.psgi
-exec starman --port 5762 --workers ${LSMB_WORKERS:-5} -I lib -I old/lib \
-        --preload-app bin/ledgersmb-server.psgi