* Automatic Dockerfile update by release process

The value 172.17.0.1 is the default gateway on the default Docker
network. However, when using this image with 'docker-compose', a
new network is created, which means that the IP address of the
gateway is different by definition. Because the network is created
at the same time as the containers, the IP address isn't available
when the YAML definition is created.

This approach replaces the static approach with a dynamic approach
executed at first container startup.

.github/workflows/no-response.yml

@@ -0,0 +1,25 @@
+name: No Response
+
+# Both `issue_comment` and `scheduled` event types are required for this Action
+# to work properly.
+on:
+  issue_comment:
+    types: [created]
+  schedule:
+    # Schedule for five minutes after the hour, every hour
+    - cron: '5 3 * * *'
+
+jobs:
+  noResponse:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: lee-dohm/no-response@v0.5.0
+        with:
+          token: ${{ github.token }}
+          # Number of days of inactivity before an Issue is closed for lack of response
+          daysUntilClose: 90
+          # Label requiring a response
+          responseRequiredLabel: waiting-for-user
+          # Comment to post when closing an Issue for lack of response. Set to `false` to disable
+          closeComment: >
+            Closing: more than 90 days without user response. Feel free to reopen with your comments.

Dockerfile

@@ -5,8 +5,8 @@ ARG SRCIMAGE=debian:bookworm-slim
 
 FROM  $SRCIMAGE AS builder
 
-ARG LSMB_VERSION="1.11.0-alpha2"
-ARG LSMB_DL_DIR="Beta Releases"
+ARG LSMB_VERSION="1.11.11"
+ARG LSMB_DL_DIR="Releases"
 ARG ARTIFACT_LOCATION="https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz"
 
 
@@ -51,8 +51,8 @@ LABEL org.opencontainers.image.description="LedgerSMB is a full featured double-
  the LedgerSMB project is to bring high quality ERP and accounting capabilities\
  to Small and Midsize Businesses."
 
-ARG LSMB_VERSION="1.11.0-alpha2"
-ARG LSMB_DL_DIR="Beta Releases"
+ARG LSMB_VERSION="1.11.11"
+ARG LSMB_DL_DIR="Releases"
 ARG ARTIFACT_LOCATION="https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz"
 
 
@@ -78,7 +78,7 @@ RUN set -x ; \
   DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
   DEBIAN_FRONTEND="noninteractive" apt-get -y upgrade && \
   DEBIAN_FRONTEND="noninteractive" apt-get -y install \
-    wget ca-certificates gnupg \
+    wget ca-certificates gnupg iproute2 \
     $( cat /tmp/derived-deps ) \
     libclass-c3-xs-perl \
     texlive-plain-generic texlive-latex-recommended texlive-fonts-recommended \
@@ -92,7 +92,7 @@ RUN set -x ; \
   wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "$ARTIFACT_LOCATION" && \
   tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
   rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
-  cpanm --notest \
+  cpanm --metacpan --notest \
     --with-feature=starman \
     --with-feature=latex-pdf-ps \
     --with-feature=openoffice \
@@ -110,7 +110,9 @@ WORKDIR /srv/ledgersmb
 # Configure outgoing mail to use host, other run time variable defaults
 
 ## MAIL
-ENV LSMB_MAIL_SMTPHOST 172.17.0.1
+# '__CONTAINER_GATEWAY__' is a magic value which will be substituted
+# with the actual gateway IP address
+ENV LSMB_MAIL_SMTPHOST __CONTAINER_GATEWAY__
 #ENV LSMB_MAIL_SMTPPORT 25
 #ENV LSMB_MAIL_SMTPSENDER_HOSTNAME (container hostname)
 #ENV LSMB_MAIL_SMTPTLS
@@ -126,7 +128,9 @@ ENV DEFAULT_DB lsmb
 COPY start.sh /usr/local/bin/start.sh
 
 RUN chmod +x /usr/local/bin/start.sh && \
-  mkdir -p /var/www
+  mkdir -p /var/www && \
+  mkdir -p /srv/ledgersmb/local/conf && \
+  chown -R www-data /srv/ledgersmb/local
 
 # Work around an aufs bug related to directory permissions:
 RUN mkdir -p /tmp && chmod 1777 /tmp

README.md

@@ -2,10 +2,23 @@
 
 Dockerfile for LedgerSMB Docker image
 
+## Content
+
+ 1. [Supported tags](#supported-tags)
+ 2. [What is LedgerSMB](#what-is-ledgersmb)
+ 3. [How to use this image](#how-to-use-this-image)
+ 4. [Set up LedgerSMB](#set-up-ledgersmb)
+ 5. [Updating the LedgerSMB container](#updating-the-ledgersmb-container)
+ 6. [Environment Variables](#environment-variables)
+ 7. [Advanced setup](#advanced-setup)
+ 8. [Troubleshooting](#troubleshootingdeveloping)
+ 9. [User feedback](#user-feedback)
+
 # Supported tags
 
-- `1.10`, `1.10.x`, `latest` - Latest official release from the 1.10 branch
-- `1.9`, `1.9.x` - Latest official release from the 1.9 branch
+- `1.11`, `1.11.x`, `latest` - Latest official release from the 1.11 branch
+- `1.10`, `1.10.x` - Latest official release from the 1.10 branch
+- `1.9`, `1.9.30` - Last official release from the 1.9 branch (End-of-Life)
 - `1.8`, `1.8.31` - Last official release from the 1.8 branch (End-of-Life)
 - `1.7`, `1.7.41` - Last official release from the 1.7 branch (End-of-Life)
 - `1.6`, `1.6.33` - Last official release from the 1.6 branch (End-of-Life)
@@ -202,6 +215,47 @@ The following parameters are now supported to set mail preferences:
 
 # Advanced setup
 
+## Changing configuration
+
+The configuration file is stored in /srv/ledgersmb/local/conf/. By mounting
+that directory using a bind-mount to a location outside the container,
+configuration can be changed between container starts:
+
+```plain
+ $ docker run -d -p 5762:5762 --name myledger \
+     --mount 'type=bind,src=/home/ledgersmb/conf,dst=/srv/ledgersmb/local/conf \
+     -e POSTGRES_HOST=<ip/hostname> ledgersmb/ledgersmb:latest
+```
+
+## Overriding or adding configuration
+
+By pre-creating a configuration file in the mounted configuration directory,
+the standard configuration generation process in the container can be overruled:
+
+```plain
+ $ cat <<EOF > /home/ledgersmb/conf/ledgersmb.yaml
+   ... YOUR CONFIG HERE ...
+ EOF
+ $ docker run -d -p 5762:5762 --name myledger \
+     --mount 'type=bind,src=/home/ledgersmb/conf,dst=/srv/ledgersmb/local/conf \
+     -e POSTGRES_HOST=<ip/hostname> ledgersmb/ledgersmb:latest
+```
+
+If you do not want to completely overrule the configuration generated, but instead
+supplement the configuration, you can put incremental configuration snippets in
+files named `ledgersmb.XXX.yaml` in the same folder. E.g.:
+
+```plain
+ $ cat <<EOF > /home/ledgersmb/conf/ledgersmb.001.yaml
+ logging:
+   file: ledgersmb.logging
+ EOF
+```
+
+[Documentation with respect to the available configuration
+keys](https://github.com/ledgersmb/LedgerSMB/blob/master/doc/conf/ledgersmb.yaml)
+is available in the LedgerSMB repository.
+
 ## Docker Compose with reverse proxy
 
 The `docker-compose-reverseproxy.yml` file shows a docker-compose setup

docker-compose.yml

@@ -31,16 +31,24 @@ services:
   lsmb:
     depends_on:
       - postgres
-    image: ghcr.io/ledgersmb/ledgersmb:1.10
+    image: ghcr.io/ledgersmb/ledgersmb:1.11
+      # In order to store the configuration outside the image, allowing it to
+      # be edited between container restarts, uncomment the section below and
+      # change the 'source' to the directory where you want the configuration
+      # to be stored.
+    # volumes:
+    #   - type: bind
+    #     source: /home/ledgersmb/conf
+    #     target: /srv/ledgersmb/local/conf
     networks:
       - internal
       - default
     # Comment the 'ports' section to disable mapping the LedgerSMB container port (5762)
-    #  to the host's port of the same number, thus making LedgerSMB
+    #  to the host's port of the same number. Mapping "5762:5762" makes LedgerSMB
     #  available on http://<host-dns-or-ip>:5762/
-    #     SECURITY NOTE: Do this for evaluation purposes only!
-    #       In production, be sure to use SSL/TLS to protect user's passwords
-    #       and other sensitive data
+    #     SECURITY NOTE:  Leave this uncommented for evaluation purposes only!
+    #       In production, be sure to use SSL/TLS (such as by reverse proxying) to protect 
+    #       user's passwords and other sensitive data
     ports:
       - "5762:5762"
     environment:

start.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 cd /srv/ledgersmb
-
+[[ -d ./local/conf/ ]] || mkdir ./local/conf/
 if [[ -n "$SSMTP_ROOT" ]]; then
     echo "\$SSMTP_ROOT set; parameter is deprecated and will be ignored"
     LSMB_HAVE_DEPRECATED=1
@@ -67,28 +67,88 @@ if [[ -n "$LSMB_HAVE_DEPRECATED" ]]; then
     echo "!!! DEPRECATED \$SSMTP_* PARAMETERS WILL BE REMOVED in the 1.9 image!!!"
 fi
 
+if [[ ! -f ./local/conf/ledgersmb.yaml ]]; then
+  cat <<EOF >./local/conf/ledgersmb.yaml
+paths:
+  \$class: Beam::Wire
+  config:
+    UI: ./UI/
+    UI_cache: lsmb_templates/
 
-if [[ ! -f ledgersmb.conf ]]; then
-  cat <<EOF >/tmp/ledgersmb.conf
-[main]
-cache_templates = 1
-[database]
-host = $POSTGRES_HOST
-port = $POSTGRES_PORT
-default_db = $DEFAULT_DB
-[mail]
-${LSMB_MAIL_SMTPHOST:+smtphost=$LSMB_MAIL_SMTPHOST
-}${LSMB_MAIL_SMTPPORT:+smtpport=$LSMB_MAIL_SMTPPORT
-}${LSMB_MAIL_SMTPSENDER_HOSTNAME:+smtpsender_hostname=$LSMB_MAIL_SMTPSENDER_HOSTNAME
-}${LSMB_MAIL_SMTPTLS:+smtptls=$LSMB_MAIL_SMTPTLS
-}${LSMB_MAIL_SMTPUSER:+smtpuser=$LSMB_MAIL_SMTPUSER
-}${LSMB_MAIL_SMTPPASS:+smtppass=$LSMB_MAIL_SMTPPASS
-}${LSMB_MAIL_SMTPAUTHMECH:+smtpauthmech=$LSMB_MAIL_SMTPAUTHMECH
-}
-[proxy]
-ip=${PROXY_IP:-172.17.0.1/12}
+db:
+  \$class: LedgerSMB::Database::Factory
+  connect_data:
+    host: ${POSTGRES_HOST:-postgres}
+    port: ${POSTGRES_PORT:-5432}
+
+mail:
+  transport:
+    \$class: LedgerSMB::Mailer::TransportSMTP
+    tls: $LSMB_MAIL_SMTPTLS
+
+miscellaneous:
+  \$class: Beam::Wire
+  config:
+    proxy_ip: ${PROXY_IP:-172.17.0.1/12}
+
+ui:
+  class: LedgerSMB::Template::UI
+  method: new_UI
+  lifecycle: eager
+  args:
+    cache:
+      \$ref: paths/UI_cache
+    root:
+      \$ref: paths/UI
 EOF
-  export LSMB_CONFIG_FILE='/tmp/ledgersmb.conf'
+
+  if [[ -n "$LSMB_MAIL_SMTPHOST" ]]
+  then
+      if [[ "$LSMB_MAIL_SMTPHOST" == "__CONTAINER_GATEWAY__" ]]
+      then
+         LSMB_MAIL_SMTPHOST="$(ip route | awk '/default/ { print $3 }')"
+         export LSMB_MAIL_SMTPHOST
+      fi
+
+      cat <<EOF >./local/conf/ledgersmb.000.yaml
+mail:
+  transport:
+    host: $LSMB_MAIL_SMTPHOST
+EOF
+  fi
+
+  if [[ -n "$LSMB_MAIL_SMTPPORT" ]]
+  then
+      cat <<EOF >./local/conf/ledgersmb.001.yaml
+mail:
+  transport:
+    port: $LSMB_MAIL_SMTPPORT
+EOF
+  fi
+
+  if [[ -n "$LSMB_MAIL_SMTPSENDER_HOSTNAME" ]]
+  then
+      cat <<EOF >./local/conf/ledgersmb.002.yaml
+mail:
+  transport:
+    helo: $LSMB_MAIL_SMTPSENDER_HOSTNAME
+EOF
+  fi
+
+  if [[ -n "$LSMB_MAIL_SMTPUSER" ]]
+  then
+      cat <<EOF >./local/conf/ledgersmb.003.yaml
+mail:
+  transport:
+    sasl_password: ''
+    sasl_username:
+      \$class: Authen::SASL
+      mechanism: $LSMB_MAIL_SMTPAUTHMECH
+      callback:
+        user: $LSMB_MAIL_SMTPUSER
+        pass: $LSMB_MAIL_SMTPPASS
+EOF
+  fi
 fi
 
 # start ledgersmb
@@ -96,12 +156,14 @@ fi
 # starman instance (instead of just the worker, which will immediately
 # get restarted) on error; it also has a positive effect on memory use
 
+LSMB_CONFIG_FILE=${LSMB_CONFIG_FILE:-./local/conf/ledgersmb.yaml}
+export LSMB_CONFIG_FILE
 echo '--------- LEDGERSMB CONFIGURATION:  ledgersmb.conf'
-cat ${LSMB_CONFIG_FILE:-ledgersmb.conf}
+cat ${LSMB_CONFIG_FILE}
 echo '--------- LEDGERSMB CONFIGURATION --- END'
 
 # ':5762:' suppresses an uninitialized variable warning in starman
 # the last colon means "don't connect using tls"; without it, there's a warning
-exec starman --listen :5762: --workers ${LSMB_WORKERS:-5} \
+exec starman --listen 0.0.0.0:5762 --workers ${LSMB_WORKERS:-5} \
              -I lib -I old/lib \
              --preload-app bin/ledgersmb-server.psgi