Update README to move 'latest' tag which now points to 1.13

Add AI warning recommended by ChatGPT

Dockerfile

@@ -1,105 +1,134 @@
-FROM        debian:stretch-slim
-MAINTAINER  Freelock john@freelock.com
-
 # Build time variables
-ENV LSMB_VERSION 1.6.21
 
+ARG SRCIMAGE=debian:trixie-slim
+
+
+FROM  $SRCIMAGE AS builder
+
+ENV LSMB_VERSION=master
+
+
+RUN set -x ; \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y upgrade && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y install dh-make-perl libmodule-cpanfile-perl git wget && \
+  apt-file update
+
+RUN set -x ; \
+  cd /srv && \
+  git clone --depth 1 --recursive -b $LSMB_VERSION https://github.com/ledgersmb/LedgerSMB.git ledgersmb && \
+  cd ledgersmb && \
+  ( ( for lib in $( cpanfile-dump --with-all-features --recommends --no-configure --no-build --no-test ) ; \
+    do \
+      if dh-make-perl locate "$lib" 2>/dev/null ; \
+      then  \
+        : \
+      else \
+        echo no : $lib ; \
+      fi ; \
+    done ) | grep -v dh-make-perl | grep -v 'not found' | grep -vi 'is in Perl ' | cut -d' ' -f4 | sort | uniq | tee /srv/derived-deps ) && \
+  cat /srv/derived-deps
+
+
+#
+#
+#  The real image build starts here
+#
+#
+
+
+FROM  $SRCIMAGE
+LABEL   org.opencontainers.image.authors="LedgerSMB project <devel@lists.ledgersmb.org>"
 
 # Install Perl, Tex, Starman, psql client, and all dependencies
-# Without libclass-c3-xs-perl, performance is terribly slow...
-# Without libclass-accessor-lite-perl, HTML::Entities won't build from CPAN
-# libnet-cidr-lite-perl is a dependency for Plack::Builder::Conditionals
-#   which is being installed from CPAN
-# libtest-requires-perl is a dependency of Module-Build-Pluggable-PPPort
-#   on which HTML::Escape depends
-
+#
+# Without libclass-c3-xs-perl, everything grinds to a halt;
+# add it, because it's a 'recommends' it the dep tree, which
+# we're skipping, normally
+#
 # Installing psql client directly from instructions at https://wiki.postgresql.org/wiki/Apt
 # That mitigates issues where the PG instance is running a newer version than this container
 
-RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
-  mkdir -p /usr/share/man/man1/ && \
-  mkdir -p /usr/share/man/man2/ && \
-  mkdir -p /usr/share/man/man3/ && \
-  mkdir -p /usr/share/man/man4/ && \
-  mkdir -p /usr/share/man/man5/ && \
-  mkdir -p /usr/share/man/man6/ && \
-  mkdir -p /usr/share/man/man7/ && \
-  DEBIAN_FRONTEND="noninteractive" apt-get update -q && \
-  DEBIAN_FRONTEND="noninteractive" apt-get dist-upgrade -y -q && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y -q install \
+COPY --from=builder /srv/derived-deps /tmp/derived-deps
+
+
+RUN set -x ; \
+  echo "APT::Install-Recommends \"false\";\nAPT::Install-Suggests \"false\";\n" > /etc/apt/apt.conf.d/00recommends && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y upgrade && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y install \
     wget ca-certificates gnupg \
-    libcgi-emulate-psgi-perl libcgi-simple-perl libconfig-inifiles-perl \
-    libdbd-pg-perl libdbi-perl libdata-uuid-perl libdatetime-perl \
-    libdatetime-format-strptime-perl libio-stringy-perl \
-    libjson-xs-perl libcpanel-json-xs-perl liblist-moreutils-perl \
-    liblocale-maketext-perl liblocale-maketext-lexicon-perl \
-    liblog-log4perl-perl libmime-lite-perl libmime-types-perl \
-    libmath-bigint-gmp-perl libmodule-runtime-perl libmoose-perl \
-    libmoosex-nonmoose-perl libnumber-format-perl \
-    libpgobject-perl libpgobject-simple-perl libpgobject-simple-role-perl \
-    libpgobject-type-bigfloat-perl libpgobject-type-datetime-perl \
-    libpgobject-type-bytestring-perl libpgobject-util-dbmethod-perl \
-    libpgobject-util-dbadmin-perl libplack-perl \
-    libplack-middleware-reverseproxy-perl \
-    libtemplate-perl libtext-csv-perl libtext-csv-xs-perl \
-    libtext-markdown-perl libxml-simple-perl \
-    libnamespace-autoclean-perl \
-    libimage-size-perl \
-    libtemplate-plugin-latex-perl libtex-encode-perl \
-    libclass-c3-xs-perl libclass-accessor-lite-perl \
-    libnet-cidr-lite-perl libtest-requires-perl \
-    texlive-latex-recommended \
+    $( cat /tmp/derived-deps ) \
+    libclass-c3-xs-perl \
+    texlive-plain-generic texlive-latex-recommended texlive-fonts-recommended \
     texlive-xetex fonts-liberation \
-    starman \
-    libopenoffice-oodoc-perl \
-    ssmtp \
     lsb-release && \
-  echo "deb http://apt.postgresql.org/pub/repos/apt/ $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list && \
-  (wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | apt-key add -) && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install postgresql-client && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install git cpanminus make gcc libperl-dev && \
-  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/Releases/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
-  tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
-  rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
-  cpanm --notest \
-    --with-feature=starman \
-    --with-feature=latex-pdf-ps \
-    --with-feature=openoffice \
-    --installdeps /srv/ledgersmb/ && \
-  apt-get purge -q -y git cpanminus make gcc libperl-dev && \
-  apt-get autoremove -q -y && \
-  apt-get autoclean -q && \
-  rm -rf ~/.cpanm/ && \
-  rm -rf /var/lib/apt/lists/* /usr/share/man/*
+  echo "deb [signed-by=/etc/apt/keyrings/postgresql.asc] http://apt.postgresql.org/pub/repos/apt/ $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list && \
+  wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc > /etc/apt/keyrings/postgresql.asc && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y install postgresql-client && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y autoremove && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y autoclean && \
+  rm -rf /var/lib/apt/lists/*
 
 
-WORKDIR /srv/ledgersmb
+# Build time variables
+ENV LSMB_VERSION=master
+ENV NODE_PATH=/usr/local/lib/node_modules
 
-# master requirements
+
+###########################################################
+# Java & Nodejs for doing Dojo build
+
+# These packages are only needed during the dojo build
+ENV DOJO_Build_Deps="git make gcc libperl-dev curl nodejs npm cpanminus"
+# These packages can be removed after the dojo build
+ENV DOJO_Build_Deps_removal="${DOJO_Build_Deps} nodejs npm cpanminus"
+
+# RUN (wget --quiet -O - https://deb.nodesource.com/setup_22.x | bash -) && \
+RUN    DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
+    DEBIAN_FRONTEND="noninteractive" apt-get -y install ${DOJO_Build_Deps} && \
+    npm i -g --no-save yarn && \
+    cd /srv && \
+    git clone --depth 1 --recursive -b $LSMB_VERSION https://github.com/ledgersmb/LedgerSMB.git ledgersmb && \
+    cd ledgersmb && \
+    cpanm --metacpan --quiet --notest \
+      --with-feature=starman \
+      --with-feature=latex-pdf-ps \
+      --with-feature=openoffice \
+      --installdeps .  && \
+    make js && \
+    DEBIAN_FRONTEND="noninteractive" apt-get -y purge ${DOJO_Build_Deps_removal} && \
+    rm -rf /usr/local/lib/node_modules && \
+    DEBIAN_FRONTEND="noninteractive" apt-get -y autoremove && \
+    DEBIAN_FRONTEND="noninteractive" apt-get -y autoclean && \
+    rm -rf ~/.cpanm && \
+    rm -rf /var/lib/apt/lists/*
+
+# Cleanup args that are for internal use
+ENV DOJO_Build_Deps=
+ENV DOJO_Build_Deps_removal=
+ENV NODE_PATH=
 
 # Configure outgoing mail to use host, other run time variable defaults
 
-## sSMTP
-ENV SSMTP_ROOT ar@example.com
-ENV SSMTP_MAILHUB 172.17.0.1
-ENV SSMTP_HOSTNAME 172.17.0.1
-#ENV SSMTP_USE_STARTTLS
-#ENV SSMTP_AUTH_USER
-#ENV SSMTP_AUTH_PASS
-ENV SSMTP_FROMLINE_OVERRIDE YES
-#ENV SSMTP_AUTH_METHOD
+## MAIL
+ENV LSMB_MAIL_SMTPHOST=172.17.0.1
+#ENV LSMB_MAIL_SMTPPORT=25
+#ENV LSMB_MAIL_SMTPSENDER_HOSTNAME=(container hostname)
+#ENV LSMB_MAIL_SMTPTLS=
+#ENV LSMB_MAIL_SMTPUSER=
+#ENV LSMB_MAIL_SMTPPASS=
+#ENV LSMB_MAIL_SMTPAUTHMECH=
 
-ENV POSTGRES_HOST postgres
-ENV POSTGRES_PORT 5432
-ENV DEFAULT_DB lsmb
+ENV POSTGRES_HOST=postgres
+ENV POSTGRES_PORT=5432
+ENV DEFAULT_DB=lsmb
 
 COPY start.sh /usr/local/bin/start.sh
-COPY update_ssmtp.sh /usr/local/bin/update_ssmtp.sh
 
-RUN chown www-data /etc/ssmtp /etc/ssmtp/ssmtp.conf && \
-  chmod +x /usr/local/bin/update_ssmtp.sh /usr/local/bin/start.sh && \
-  mkdir -p /var/www
+RUN chmod +x /usr/local/bin/start.sh && \
+    mkdir -p /var/www
 
 # Work around an aufs bug related to directory permissions:
 RUN mkdir -p /tmp && \

README.md

@@ -1,14 +1,23 @@
 # ledgersmb-docker
+
 Dockerfile for LedgerSMB Docker image
 
 # Supported tags
 
-- `1.8` - Preview version for the 1.8 branch
-- `1.7`, `1.7.x`, `latest` - Latest official release from 1.7 branch
-- `1.6`, `1.6.x`, `latest` - Latest release tarball from 1.6 branch
-- `1.5`, `1.5.x` - Latest release tarball from 1.5 branch
-- `1.4`, `1.4.x` - Latest tagged release of git 1.4 branch
+- `1.13`, `1.13.x`, `latest` - Latest official release from the 1.13 branch
+- `1.12`, `1.12.x` - Latest official release from the 1.12 branch
+- `1.11`, `1.11.x` - Latest official release from the 1.11 branch
+- `1.10`, `1.10.38` - Last official release from the 1.10 branch
+- `1.9`, `1.9.30` - Last official release from 1.9 branch (End-of-Life)
+- `1.8`, `1.8.31` - Last official release from 1.8 branch (End-of-Life)
+- `1.7`, `1.7.41` - Last official release from 1.7 branch (End-of-Life)
+- `1.6`, `1.6.33` - Last official release from 1.6 branch (End-of-Life)
+- `1.5`, `1.5.30` - Last official release from 1.5 branch (End-of-Life)
+- `1.4`, `1.4.42` - Last official release from 1.4 branch (End-of-Life)
+- `master` - Master branch from git, unstable
 
+Containers supporting the development process are provided
+through the ledgersmb-dev-docker project. See https://github.com/ledgersmb/ledgersmb-dev-docker/blob/master/README.md#getting-started.
 
 # What is LedgerSMB?
 
@@ -36,33 +45,45 @@ to add the TLS layer by applying Nginx or Apache as reverse proxy.
 Enabling optional functionalities such as outgoing e-mail and printing
 could require additional setup of a mail service or CUPS printer service.
 
-# Quickstart
+# How to use this image
 
-The quickest way to get this image up and running is by using the
-`docker-compose` file available through the GitHub repository at:
+This image can be installed either automatically with the Docker compose file
+manually with docker only.
 
-  https://github.com/ledgersmb/ledgersmb-docker/blob/1.7/docker-compose.yml
+❌ Do not use unofficial or AI-generated Docker Compose examples. These are 
+often incomplete, break silently, or skip required services.
 
-which sets up both this image and a supporting database image for
-production purposes (i.e. with persistent (database) data. The database
-username and password are:
+## Docker-Compose installation and start
+
+This image provides `docker-compose.yml` which can be used to pull related
+images, install them, establish an internal network for their communications,
+adjust environment variables, start and stop LedgerSMB. The only instructions
+required, after the optional edition of the file to adjust the environment
+variables, are:
+
+```plain
+ $ docker-compose pull
+ $ docker-compose up
+```
+
+This will set up two containers: (1) a PostgreSQL container with persistent
+storage which is retained between container updates and (2) a LedgerSMB
+container configured to connect to the PostgreSQL container as its database
+server.
+
+The database username and password are:
 
 ```plain
    username: postgres
    password: abc
 ```
 
-The docker-compose file does *not* set up an Nginx or Apache reverse proxy
-with TLS 1.2/1.3 support -- a requirement if you want to access your
-installation over any type of network (and especially the internet).
-
-
 ## Manual installation
 
 This section assumes availability of a PostgreSQL server to attach to the
 LedgerSMB image as the database server.
 
-## Start LedgerSMB
+### Start LedgerSMB
 
 ```plain
  $ docker run -d -p 5762:5762 --name myledger \
@@ -76,7 +97,7 @@ http://localhost:5762/setup.pl and http://localhost:5762/login.pl.
 Below are more variables which determine container configuration,
 like `POSTGRES_HOST` above.
 
-## Set up LedgerSMB
+# Set up LedgerSMB
 
  * Visit http://myledger:5762/setup.pl.
  * Log in with the "postgres" user and the password `abc` as given above -
@@ -132,21 +153,18 @@ affect the performance experience of users.
 
 ## Mail configuration
 
-The docker image uses `ssmtp` to send mail.
+### Before 1.8.0
 
-* `SSMTP_ROOT` (config: `Root`)
+These variables are used to set outgoing SMTP defaults.
+
+* `SSMTP_ROOT` (config: `Root` -- DEPRECATED)
 * `SSMTP_MAILHUB` (config: `Mailhub`)
 * `SSMTP_HOSTNAME` (config: `Hostname`)
 * `SSMTP_USE_STARTTLS` (config: `UseSTARTTLS`)
 * `SSMTP_AUTH_USER` (config: `AuthUser`)
 * `SSMTP_AUTH_PASS` (config: `AuthPass`)
-* `SSMTP_AUTH_METHOD` (config: `AuthMethod`)
-* `SSMTP_FROMLINE_OVERRIDE` (config: `FromLineOverride`)
-
-These variables are used to set outgoing SMTP defaults.
-
-To set the outgoing email address, set `SSMTP_ROOT` and `SSMTP_HOSTNAME` at
-a minimum.
+* `SSMTP_AUTH_METHOD` (config: `AuthMethod` -- DEPRECATED)
+* `SSMTP_FROMLINE_OVERRIDE` (config: `FromLineOverride` -- DEPRECATED)
 
 `SSMTP_MAILHUB` defaults to the default docker0 interface, so if your host is
 already configured to relay mail, this should relay successfully with only
@@ -157,6 +175,25 @@ Use the [ssmtp.conf man
 page](https://www.systutorials.com/docs/linux/man/5-ssmtp.conf/) to look up
 the meaning and function of each of the mail configuration keys.
 
+### 1.8.0 and higher (under development)
+
+As of 1.8.0, the image is based on Debian Buster instead of Debian Stretch;
+with Buster, the `ssmtp` program has been removed from Debian, this image
+had to change strategy. The main application always came with built-in e-mail
+yet with the deprecation, the abilities have expanded.
+
+The following parameters are now supported to set mail preferences:
+
+* `LSMB_MAIL_SMTPHOST`
+* `LSMB_MAIL_SMTPPORT`
+* `LSMB_MAIL_SMTPTLS`
+* `LSMB_MAIL_SMTPSENDER_HOSTNAME`
+* `LSMB_MAIL_SMTPUSER`
+* `LSMB_MAIL_SMTPPASS`
+* `LSMB_MAIL_SMTPAUTHMECH`
+
+
+
 # Troubleshooting/Developing
 
 Currently the LedgerSMB installation is in /srv/ledgersmb

docker-compose.yml

@@ -16,7 +16,7 @@ services:
   # because that allows us to use the default hostname ("postgres")
   # from the LedgerSMB configuration
   postgres:
-    image: postgres:9.6-alpine
+    image: postgres:14-alpine
     environment:
       # Replace the password below for a secure setup
       POSTGRES_PASSWORD: abc
@@ -28,7 +28,7 @@ services:
   lsmb:
     depends_on:
       - postgres
-    image: ledgersmb/ledgersmb:1.6
+    image: ghcr.io/ledgersmb/ledgersmb:master
     networks:
       - internal
       - default
@@ -58,6 +58,15 @@ services:
       # SSMTP_AUTH_METHOD:
       # SSMTP_USE_STARTTLS:
       # SSMTP_FROMLINE_OVERRIDE:
+      #
+      #
+      # The PROXY_IP environment variable lets you set the IP address
+      # (range) of the reverse proxy used for TLS termination, which forwards
+      # its requests to this container. When this reverse proxy runs on the
+      # Docker host, the default below applies. In case the reverse proxy is
+      # hosted in a separate container, this setting needs to be adjusted.
+      #
+      # PROXY_IP: 172.17.0.1/12
 
 # having the dbdata volume is required to persist our
 # data between PostgreSQL container updates; without

start.sh

@@ -1,8 +1,85 @@
 #!/bin/bash
 
-update_ssmtp.sh
 cd /srv/ledgersmb
 
+if [[ -n "$SSMTP_ROOT" ]]; then
+    echo "\$SSMTP_ROOT set; parameter is deprecated and will be ignored"
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_FROMLINE_OVERRIDE" ]]; then
+    echo "\$SSMTP_FROMLINE_OVERRIDE set; parameter is deprecated and will be ignored"
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_MAILHUB" ]]; then
+    echo "\$SSMTP_MAILHUB set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPHOST" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPHOST setting from \$SSMTP_MAILHUB"
+        LSMB_MAIL_SMTPHOST=${SSMTP_MAILHUB%:*}
+    fi
+    if [[ -z "$LSMB_MAIL_SMTPPORT" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPPORT setting from \$SSMTP_MAILHUB"
+        LSMB_MAIL_SMTPPORT=${SSMTP_MAILHUB#*:}
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_HOSTNAME" ]]; then
+    echo "\$SSMTP_HOSTNAME set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPSENDER_HOSTNAME" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPSENDER_HOSTNAME setting from \$SSMTP_HOSTNAME"
+        LSMB_MAIL_SMTPSENDER_HOSTNAME=$SSMTP_HOSTNAME
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_USE_STARTTLS" ]]; then
+    echo "\$SSMTP_USE_STARTTLS set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPTLS" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPSENDER_HOSTNAME setting from \$SSMTP_USE_STARTTLS"
+        LSMB_MAIL_SMTPTLS=$SSMTP_USE_STARTTLS
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_AUTH_USER" ]]; then
+    echo "\$SSMTP_AUTH_USER set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPUSER" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPUSER setting from \$SSMTP_AUTH_USER"
+        LSMB_MAIL_SMTPUSER=$SSMTP_AUTH_USER
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_AUTH_PASS" ]]; then
+    echo "\$SSMTP_AUTH_PASS set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPPASS" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPPASS setting from \$SSMTP_AUTH_PASS"
+        LSMB_MAIL_SMTPPASS=$SSMTP_AUTH_PASS
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_AUTH_METHOD" ]]; then
+    echo "\$SSMTP_AUTH_METHOD set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPAUTHMECH" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPAUTHMECH setting from \$SSMTP_AUTH_METHOD"
+        LSMB_MAIL_SMTPAUTHMECH=$SSMTP_AUTH_METHOD
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+
+if [[ -n "$LSMB_HAVE_DEPRECATED" ]]; then
+    echo "!!! DEPRECATED \$SSMTP_* PARAMETERS WILL BE REMOVED in the 1.9 image!!!"
+fi
+# This was never a parameter: ?
+# if [[ -n "$SSMTP_USE_TLS" ]]; then
+#     echo "\$SSMTP_USE_TLS set; parameter is deprecated"
+#     if [[ -z "$LSMB_MAIL_SMTPTLS" ]]; then
+#         echo "  Deriving \$LSMB_MAIL_SMTPSENDER_HOSTNAME setting from \$SSMTP_MAILHUB"
+#         if [[ "$SSMTP_USE_TLS" == "yes" ]]; then
+#             LSMB_MAIL_SMTPTLS=raw
+#         else
+#             LSMB_MAIL_SMTPTLS=no
+#         fi
+#     fi
+# fi
+
+
 if [[ ! -f ledgersmb.conf ]]; then
   cat <<EOF >/tmp/ledgersmb.conf
 [main]
@@ -14,15 +91,21 @@ port = $POSTGRES_PORT
 default_db = $DEFAULT_DB
 
 [mail]
-sendmail   = /usr/sbin/ssmtp
+${LSMB_MAIL_SMTPHOST:+smtphost=$LSMB_MAIL_SMTPHOST
+}${LSMB_MAIL_SMTPPORT:+smtpport=$LSMB_MAIL_SMTPPORT
+}${LSMB_MAIL_SMTPSENDER_HOSTNAME:+smtpsender_hostname=$LSMB_MAIL_SMTPSENDER_HOSTNAME
+}${LSMB_MAIL_SMTPTLS:+smtptls=$LSMB_MAIL_SMTPTLS
+}${LSMB_MAIL_SMTPUSER:+smtpuser=$LSMB_MAIL_SMTPUSER
+}${LSMB_MAIL_SMTPPASS:+smtppass=$LSMB_MAIL_SMTPPASS
+}${LSMB_MAIL_SMTPAUTHMECH:+smtpauthmech=$LSMB_MAIL_SMTPAUTHMECH
+}
 
+[proxy]
+ip=${PROXY_IP:-172.17.0.1/12}
 EOF
   export LSMB_CONFIG_FILE='/tmp/ledgersmb.conf'
 fi
 
-if [ ! -f "/tmp/ledgersmb" ]; then
-  mkdir /tmp/ledgersmb
-fi
 # Currently unmaintained/untested
 # if [ ! -z ${CREATE_DATABASE+x} ]; then
 #   perl tools/dbsetup.pl --company $CREATE_DATABASE \
@@ -30,20 +113,17 @@ fi
 #   --postgres_password "$POSTGRES_PASS"
 #fi
 
-# Needed for modules loaded by cpanm
-export PERL5LIB
-
-for PerlLib in /usr/lib/perl5* /usr/local/lib/perl5*/site_perl/* ; do
-    [[ -d "$PerlLib" ]] && {
-        PERL5LIB="$PerlLib";
-        echo -e "\tmaybe: $PerlLib";
-    }
-done ;
-echo "Selected PERL5LIB=$PERL5LIB";
-
 # start ledgersmb
 # --preload-app allows application initialization to kill the entire
 # starman instance (instead of just the worker, which will immediately
 # get restarted); it also has a positive effect on memory use
 
-exec starman --port 5762 --workers ${LSMB_WORKERS:-5} --preload-app bin/ledgersmb-server.psgi
+echo '--------- LEDGERSMB CONFIGURATION:  ledgersmb.conf'
+cat ${LSMB_CONFIG_FILE:-ledgersmb.conf}
+echo '--------- LEDGERSMB CONFIGURATION --- END'
+
+# ':5762:' suppresses an uninitialized variable warning in starman
+# the last colon means "don't connect using tls"; without it, there's a warning
+exec starman --listen :5762: --workers ${LSMB_WORKERS:-5} \
+             -I lib -I old/lib \
+             --preload-app bin/ledgersmb-server.psgi

update_ssmtp.sh

@@ -1,18 +0,0 @@
-#!/bin/bash
-ConfiguredComment='# install script update_ssmtp.sh has configured ssmtp'
-grep -qc "$ConfiguredComment" /etc/ssmtp/ssmtp.conf && {
-    echo "smtp configured."
-    exit
-}
-
-sed -i \
-    -e "s/\(root=\).*\$/\1$SSMTP_ROOT/g" \
-    -e "s/\(mailhub=\).*\$/\1$SSMTP_MAILHUB/g" \
-    -e "s/\(hostname=\).*\$/\1$SSMTP_HOSTNAME/g" \
-    /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_USE_STARTTLS" ] || echo "UseSTARTTLS=$SSMTP_USE_STARTTLS" >> /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_AUTH_USER" ] || echo "AuthUser=$SSMTP_AUTH_USER" >> /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_AUTH_PASS" ] || echo "AuthPass=$SSMTP_AUTH_PASS" >> /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_AUTH_METHOD" ] || echo "AuthMethod=$SSMTP_AUTH_METHOD" >> /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_FROMLINE_OVERRIDE" ] || echo "FromLineOverride=$SSMTP_FROMLINE_OVERRIDE" >> /etc/ssmtp/ssmtp.conf
-echo "$ConfiguredComment" >> /etc/ssmtp/ssmtp.conf