* Automatic Dockerfile update by release process

Debian Buster wants us to explicitly install liblocale-codes-perl as a dependency because it's going to be removed from Perl's CORE.

Dockerfile

@@ -1,26 +1,18 @@
-FROM        debian:stretch-slim
+FROM        debian:buster-slim
 MAINTAINER  Freelock john@freelock.com
 
 # Build time variables
-ARG LSMB_VERSION="1.7.9"
+ARG LSMB_VERSION="1.8.4"
 ARG LSMB_DL_DIR="Releases"
 
 # Install Perl, Tex, Starman, psql client, and all dependencies
 # Without libclass-c3-xs-perl, performance is terribly slow...
-# Without libclass-accessor-lite-perl, HTML::Entities won't build from CPAN
-# libnet-cidr-lite-perl is a dependency for Plack::Builder::Conditionals
-#   which is being installed from CPAN
-# libtest-requires-perl is a dependency of Module-Build-Pluggable-PPPort
-#   on which HTML::Escape depends
 
 # Installing psql client directly from instructions at https://wiki.postgresql.org/wiki/Apt
 # That mitigates issues where the PG instance is running a newer version than this container
+# Install Locale::Codes Locale::Country Locale::Language from CPAN to suppress
+# deprecation-as-core-module warning
 
-# for Buster, add:
-#    libhtml-escape-perl \
-#    libplack-middleware-builder-conditionals-perl \
-#    libplack-request-withencoding-perl \
-#libversion-compare-perl
 RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
   mkdir -p /usr/share/man/man1/ && \
   mkdir -p /usr/share/man/man2/ && \
@@ -29,45 +21,49 @@ RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >>
   mkdir -p /usr/share/man/man5/ && \
   mkdir -p /usr/share/man/man6/ && \
   mkdir -p /usr/share/man/man7/ && \
-  DEBIAN_FRONTEND="noninteractive" apt-get update -q && \
-  DEBIAN_FRONTEND="noninteractive" apt-get dist-upgrade -y -q && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y -q install \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y upgrade && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y install \
     wget ca-certificates gnupg \
-    libcgi-emulate-psgi-perl libconfig-inifiles-perl \
-    libdbd-pg-perl libdbi-perl libdata-uuid-perl libdatetime-perl \
-    libdatetime-format-strptime-perl \
-    libio-stringy-perl \
-    libcpanel-json-xs-perl liblist-moreutils-perl \
+    libauthen-sasl-perl libcgi-emulate-psgi-perl libconfig-inifiles-perl \
+    libcookie-baker-perl libdbd-pg-perl libdbi-perl libdata-uuid-perl \
+    libdatetime-perl libdatetime-format-strptime-perl \
+    libemail-sender-perl libemail-stuffer-perl libfile-find-rule-perl \
+    libhtml-escape-perl libhttp-headers-fast-perl libio-stringy-perl \
+    libjson-maybexs-perl libcpanel-json-xs-perl libjson-pp-perl \
+    liblist-moreutils-perl \
     liblocale-maketext-perl liblocale-maketext-lexicon-perl \
-    liblog-log4perl-perl libmime-lite-perl libmime-types-perl \
-    libmath-bigint-gmp-perl libmodule-runtime-perl libmoose-perl \
+    liblog-log4perl-perl libmime-types-perl \
+    libmath-bigint-gmp-perl libmodule-runtime-perl libmoo-perl \
+    libmoox-types-mooselike-perl libmoose-perl \
     libmoosex-nonmoose-perl libnumber-format-perl \
     libpgobject-perl libpgobject-simple-perl libpgobject-simple-role-perl \
     libpgobject-type-bigfloat-perl libpgobject-type-datetime-perl \
     libpgobject-type-bytestring-perl libpgobject-util-dbmethod-perl \
     libpgobject-util-dbadmin-perl libplack-perl \
-    libplack-middleware-reverseproxy-perl \
+    libplack-builder-conditionals-perl libplack-middleware-reverseproxy-perl \
+    libplack-request-withencoding-perl libscope-guard-perl \
+    libsession-storage-secure-perl libstring-random-perl \
     libtemplate-perl libtext-csv-perl libtext-csv-xs-perl \
-    libtext-markdown-perl  libxml-simple-perl \
-    libnamespace-autoclean-perl \
-    libfile-find-rule-perl \
+    libtext-markdown-perl libtry-tiny-perl libversion-compare-perl \
+    libxml-libxml-perl libnamespace-autoclean-perl \
+    starman starlet libhttp-parser-xs-perl \
     libtemplate-plugin-latex-perl libtex-encode-perl \
-    libclass-c3-xs-perl libclass-accessor-lite-perl \
-    libnet-cidr-lite-perl \
-    texlive-latex-recommended \
+    libxml-twig-perl libopenoffice-oodoc-perl \
+    libexcel-writer-xlsx-perl libspreadsheet-writeexcel-perl \
+    libclass-c3-xs-perl liblocale-codes-perl \
+    texlive-latex-recommended texlive-fonts-recommended \
     texlive-xetex fonts-liberation \
-    starman \
-    libopenoffice-oodoc-perl \
-    ssmtp \
     lsb-release && \
   echo "deb http://apt.postgresql.org/pub/repos/apt/ $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list && \
   (wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | apt-key add -) && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install postgresql-client && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y install postgresql-client && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y install git cpanminus make gcc libperl-dev && \
   wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
   tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
   rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
+  cpanm --reinstall --notest Locale::Country Locale::Codes Locale::Language && \
   cpanm --notest \
     --with-feature=starman \
     --with-feature=latex-pdf-ps \
@@ -75,9 +71,8 @@ RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >>
     --installdeps /srv/ledgersmb/ && \
   apt-get purge -q -y git cpanminus make gcc libperl-dev && \
   apt-get autoremove -q -y && \
-  apt-get autoclean -q && \
-  rm -rf ~/.cpanm/ && \
-  rm -rf /var/lib/apt/lists/* /usr/share/man/*
+  apt-get clean -q && \
+  rm -rf ~/.cpanm/ /var/lib/apt/lists/* /usr/share/man/*
 
 
 WORKDIR /srv/ledgersmb
@@ -86,30 +81,27 @@ WORKDIR /srv/ledgersmb
 
 # Configure outgoing mail to use host, other run time variable defaults
 
-## sSMTP
-ENV SSMTP_ROOT ar@example.com
-ENV SSMTP_MAILHUB 172.17.0.1
-ENV SSMTP_HOSTNAME 172.17.0.1
-#ENV SSMTP_USE_STARTTLS
-#ENV SSMTP_AUTH_USER
-#ENV SSMTP_AUTH_PASS
-ENV SSMTP_FROMLINE_OVERRIDE YES
-#ENV SSMTP_AUTH_METHOD
+## MAIL
+ENV LSMB_MAIL_SMTPHOST 172.17.0.1
+#ENV LSMB_MAIL_SMTPPORT 25
+#ENV LSMB_MAIL_SMTPSENDER_HOSTNAME (container hostname)
+#ENV LSMB_MAIL_SMTPTLS
+#ENV LSMB_MAIL_SMTPUSER
+#ENV LSMB_MAIL_SMTPPASS
+#ENV LSMB_MAIL_SMTPAUTHMECH
 
+## DATABASE
 ENV POSTGRES_HOST postgres
 ENV POSTGRES_PORT 5432
 ENV DEFAULT_DB lsmb
 
 COPY start.sh /usr/local/bin/start.sh
-COPY update_ssmtp.sh /usr/local/bin/update_ssmtp.sh
 
-RUN chown www-data /etc/ssmtp /etc/ssmtp/ssmtp.conf && \
-  chmod +x /usr/local/bin/update_ssmtp.sh /usr/local/bin/start.sh && \
+RUN chmod +x /usr/local/bin/start.sh && \
   mkdir -p /var/www
 
 # Work around an aufs bug related to directory permissions:
-RUN mkdir -p /tmp && \
-  chmod 1777 /tmp
+RUN mkdir -p /tmp && chmod 1777 /tmp
 
 # Internal Port Expose
 EXPOSE 5762

README.md

@@ -1,12 +1,18 @@
 # ledgersmb-docker
+
 Dockerfile for LedgerSMB Docker image
 
 # Supported tags
 
-- `1.6`, `1.6.x`, `latest` - Latest release tarball from 1.6 branch
-- `1.5`, `1.5.x` - Latest release tarball from 1.5 branch
-- `1.4`, `1.4.x` - Latest tagged release of git 1.4 branch
+- `1.8` - Preview version for the 1.8 branch
+- `1.7`, `1.7.x`, `latest` - Latest official release from 1.7 branch
+- `1.6`, `1.6.x` - Latest official release from 1.6 branch 
+- `1.5`, `1.5.30` - Last official release from 1.5 branch
+- `1.4`, `1.4.42` - Last official release from 1.4 branch
+- `master` - Master branch from git, unstable
 
+Containers supporting the development process are provided
+through the ledgersmb-dev-docker project. See https://github.com/ledgersmb/ledgersmb-dev-docker/blob/master/README.md#getting-started.
 
 # What is LedgerSMB?
 
@@ -23,9 +29,9 @@ This image is designed to be used in conjunction with a running PostgreSQL
 instance (such as may be provided through a separate image).
 
 This image exposes port 5762 running a Starman HTTP application server. We
-do not recommend exposing this port publicly, because
+do recommend not exposing this port publicly, because
 
-1. The Starman author recommends it
+1. The Starman author recommends not exposing it
 2. We strongly recommend TLS encryption of all application traffic
 
 While the exposed port can be used for quick evaluation, it's recommended
@@ -34,33 +40,45 @@ to add the TLS layer by applying Nginx or Apache as reverse proxy.
 Enabling optional functionalities such as outgoing e-mail and printing
 could require additional setup of a mail service or CUPS printer service.
 
-# Quickstart
+# How to use this image
 
-The quickest way to get this image up and running is by using the
-`docker-compose` file available through the GitHub repository at:
+This image can be installed either automatically with the Docker compose file
+or manually with docker only.
 
-  https://github.com/ledgersmb/ledgersmb-docker/blob/1.7/docker-compose.yml
+## Docker-Compose installation and start
 
-which sets up both this image and a supporting database image for
-production purposes (i.e. with persistent (database) data. The database
-username and password are:
+This image provides `docker-compose.yml` which can be used to pull related
+images, install them, establish an internal network for their communications,
+adjust environment variables, start and stop LedgerSMB. The only instructions
+required, after the optional edition of the file to adjust the environment
+variables, are:
+
+```plain
+ $ docker-compose pull
+ $ docker-compose up
+```
+
+This will set up two containers: (1) a PostgreSQL container with persistent
+storage which is retained between container updates and (2) a LedgerSMB
+container configured to connect to the PostgreSQL container as its database
+server.
+
+The database username and password are:
 
 ```plain
    username: postgres
    password: abc
 ```
 
-The docker-compose file does *not* set up an Nginx or Apache reverse proxy
-with TLS 1.2/1.3 support -- a requirement if you want to access your
-installation over any type of network (and especially the internet).
-
+From here, follow the steps as detailed in the instructions for
+[preparing for first use](https://ledgersmb.org/content/preparing-ledgersmb-17-first-use).
 
 ## Manual installation
 
 This section assumes availability of a PostgreSQL server to attach to the
 LedgerSMB image as the database server.
 
-## Start LedgerSMB
+### Start LedgerSMB
 
 ```plain
  $ docker run -d -p 5762:5762 --name myledger \
@@ -74,7 +92,7 @@ http://localhost:5762/setup.pl and http://localhost:5762/login.pl.
 Below are more variables which determine container configuration,
 like `POSTGRES_HOST` above.
 
-## Set up LedgerSMB
+# Set up LedgerSMB
 
  * Visit http://myledger:5762/setup.pl.
  * Log in with the "postgres" user and the password `abc` as given above -
@@ -130,21 +148,18 @@ affect the performance experience of users.
 
 ## Mail configuration
 
-The docker image uses `ssmtp` to send mail.
+### Before 1.8.0
 
-* `SSMTP_ROOT` (config: `Root`)
+These variables are used to set outgoing SMTP defaults.
+
+* `SSMTP_ROOT` (config: `Root` -- DEPRECATED)
 * `SSMTP_MAILHUB` (config: `Mailhub`)
 * `SSMTP_HOSTNAME` (config: `Hostname`)
 * `SSMTP_USE_STARTTLS` (config: `UseSTARTTLS`)
 * `SSMTP_AUTH_USER` (config: `AuthUser`)
 * `SSMTP_AUTH_PASS` (config: `AuthPass`)
-* `SSMTP_AUTH_METHOD` (config: `AuthMethod`)
-* `SSMTP_FROMLINE_OVERRIDE` (config: `FromLineOverride`)
-
-These variables are used to set outgoing SMTP defaults.
-
-To set the outgoing email address, set `SSMTP_ROOT` and `SSMTP_HOSTNAME` at
-a minimum.
+* `SSMTP_AUTH_METHOD` (config: `AuthMethod` -- DEPRECATED)
+* `SSMTP_FROMLINE_OVERRIDE` (config: `FromLineOverride` -- DEPRECATED)
 
 `SSMTP_MAILHUB` defaults to the default docker0 interface, so if your host is
 already configured to relay mail, this should relay successfully with only
@@ -155,6 +170,25 @@ Use the [ssmtp.conf man
 page](https://www.systutorials.com/docs/linux/man/5-ssmtp.conf/) to look up
 the meaning and function of each of the mail configuration keys.
 
+### 1.8.0 and higher (under development)
+
+As of 1.8.0, the image is based on Debian Buster instead of Debian Stretch;
+with Buster, the `ssmtp` program has been removed from Debian, this image
+had to change strategy. The main application always came with built-in e-mail
+yet with the deprecation, the abilities have expanded.
+
+The following parameters are now supported to set mail preferences:
+
+* `LSMB_MAIL_SMTPHOST`
+* `LSMB_MAIL_SMTPPORT`
+* `LSMB_MAIL_SMTPTLS`
+* `LSMB_MAIL_SMTPSENDER_HOSTNAME`
+* `LSMB_MAIL_SMTPUSER`
+* `LSMB_MAIL_SMTPPASS`
+* `LSMB_MAIL_SMTPAUTHMECH`
+
+
+
 # Troubleshooting/Developing
 
 Currently the LedgerSMB installation is in /srv/ledgersmb

start.sh

@@ -1,33 +1,105 @@
 #!/bin/bash
 
-update_ssmtp.sh
 cd /srv/ledgersmb
 
+if [[ -n "$SSMTP_ROOT" ]]; then
+    echo "\$SSMTP_ROOT set; parameter is deprecated and will be ignored"
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_FROMLINE_OVERRIDE" ]]; then
+    echo "\$SSMTP_FROMLINE_OVERRIDE set; parameter is deprecated and will be ignored"
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_MAILHUB" ]]; then
+    echo "\$SSMTP_MAILHUB set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPHOST" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPHOST setting from \$SSMTP_MAILHUB"
+        LSMB_MAIL_SMTPHOST=${SSMTP_MAILHUB%:*}
+    fi
+    if [[ -z "$LSMB_MAIL_SMTPPORT" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPPORT setting from \$SSMTP_MAILHUB"
+        LSMB_MAIL_SMTPPORT=${SSMTP_MAILHUB#*:}
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_HOSTNAME" ]]; then
+    echo "\$SSMTP_HOSTNAME set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPSENDER_HOSTNAME" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPSENDER_HOSTNAME setting from \$SSMTP_HOSTNAME"
+        LSMB_MAIL_SMTPSENDER_HOSTNAME=$SSMTP_HOSTNAME
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_USE_STARTTLS" ]]; then
+    echo "\$SSMTP_USE_STARTTLS set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPTLS" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPSENDER_HOSTNAME setting from \$SSMTP_USE_STARTTLS"
+        LSMB_MAIL_SMTPTLS=$SSMTP_USE_STARTTLS
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_AUTH_USER" ]]; then
+    echo "\$SSMTP_AUTH_USER set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPUSER" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPUSER setting from \$SSMTP_AUTH_USER"
+        LSMB_MAIL_SMTPUSER=$SSMTP_AUTH_USER
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_AUTH_PASS" ]]; then
+    echo "\$SSMTP_AUTH_PASS set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPPASS" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPPASS setting from \$SSMTP_AUTH_PASS"
+        LSMB_MAIL_SMTPPASS=$SSMTP_AUTH_PASS
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+if [[ -n "$SSMTP_AUTH_METHOD" ]]; then
+    echo "\$SSMTP_AUTH_METHOD set; parameter is deprecated"
+    if [[ -z "$LSMB_MAIL_SMTPAUTHMECH" ]]; then
+        echo "  Deriving \$LSMB_MAIL_SMTPAUTHMECH setting from \$SSMTP_AUTH_METHOD"
+        LSMB_MAIL_SMTPAUTHMECH=$SSMTP_AUTH_METHOD
+    fi
+    LSMB_HAVE_DEPRECATED=1
+fi
+
+if [[ -n "$LSMB_HAVE_DEPRECATED" ]]; then
+    echo "!!! DEPRECATED \$SSMTP_* PARAMETERS WILL BE REMOVED in the 1.9 image!!!"
+fi
+
+
 if [[ ! -f ledgersmb.conf ]]; then
   cat <<EOF >/tmp/ledgersmb.conf
 [main]
 cache_templates = 1
-
 [database]
 host = $POSTGRES_HOST
 port = $POSTGRES_PORT
 default_db = $DEFAULT_DB
-
 [mail]
-sendmail   = /usr/sbin/ssmtp
-
+${LSMB_MAIL_SMTPHOST:+smtphost=$LSMB_MAIL_SMTPHOST
+}${LSMB_MAIL_SMTPPORT:+smtpport=$LSMB_MAIL_SMTPPORT
+}${LSMB_MAIL_SMTPSENDER_HOSTNAME:+smtpsender_hostname=$LSMB_MAIL_SMTPSENDER_HOSTNAME
+}${LSMB_MAIL_SMTPTLS:+smtptls=$LSMB_MAIL_SMTPTLS
+}${LSMB_MAIL_SMTPUSER:+smtpuser=$LSMB_MAIL_SMTPUSER
+}${LSMB_MAIL_SMTPPASS:+smtppass=$LSMB_MAIL_SMTPPASS
+}${LSMB_MAIL_SMTPAUTHMECH:+smtpauthmech=$LSMB_MAIL_SMTPAUTHMECH
+}
 EOF
   export LSMB_CONFIG_FILE='/tmp/ledgersmb.conf'
 fi
 
-if [ ! -d "/tmp/ledgersmb" ]; then
-  mkdir -p /tmp/ledgersmb
-fi
-
 # start ledgersmb
 # --preload-app allows application initialization to kill the entire
 # starman instance (instead of just the worker, which will immediately
-# get restarted); it also has a positive effect on memory use
+# get restarted) on error; it also has a positive effect on memory use
 
-exec starman --port 5762 --workers ${LSMB_WORKERS:-5} -I lib -I old/lib \
-        --preload-app bin/ledgersmb-server.psgi
+echo '--------- LEDGERSMB CONFIGURATION:  ledgersmb.conf'
+cat ${LSMB_CONFIG_FILE:-ledgersmb.conf}
+echo '--------- LEDGERSMB CONFIGURATION --- END'
+
+# ':5762:' suppresses an uninitialized variable warning in starman
+# the last colon means "don't connect using tls"; without it, there's a warning
+exec starman --listen :5762: --max-workers ${LSMB_WORKERS:-5} \
+             -I lib -I old/lib \
+             --preload-app bin/ledgersmb-server.psgi

update_ssmtp.sh

@@ -1,18 +0,0 @@
-#!/bin/bash
-ConfiguredComment='# install script update_ssmtp.sh has configured ssmtp'
-grep -qc "$ConfiguredComment" /etc/ssmtp/ssmtp.conf && {
-    echo "smtp configured."
-    exit
-}
-
-sed -i \
-    -e "s/\(root=\).*\$/\1$SSMTP_ROOT/g" \
-    -e "s/\(mailhub=\).*\$/\1$SSMTP_MAILHUB/g" \
-    -e "s/\(hostname=\).*\$/\1$SSMTP_HOSTNAME/g" \
-    /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_USE_STARTTLS" ] || echo "UseSTARTTLS=$SSMTP_USE_STARTTLS" >> /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_AUTH_USER" ] || echo "AuthUser=$SSMTP_AUTH_USER" >> /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_AUTH_PASS" ] || echo "AuthPass=$SSMTP_AUTH_PASS" >> /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_AUTH_METHOD" ] || echo "AuthMethod=$SSMTP_AUTH_METHOD" >> /etc/ssmtp/ssmtp.conf
-[ -z "$SSMTP_FROMLINE_OVERRIDE" ] || echo "FromLineOverride=$SSMTP_FROMLINE_OVERRIDE" >> /etc/ssmtp/ssmtp.conf
-echo "$ConfiguredComment" >> /etc/ssmtp/ssmtp.conf