* Automatic Dockerfile update by release process

Dockerfile

@@ -1,66 +1,27 @@
+FROM        debian:stretch-slim
+MAINTAINER  Freelock john@freelock.com
+
 # Build time variables
-
-ARG SRCIMAGE=debian:bullseye-slim
-
-
-FROM  $SRCIMAGE AS builder
-
-ARG LSMB_VERSION="1.9.4"
+ARG LSMB_VERSION="1.7.21"
 ARG LSMB_DL_DIR="Releases"
-ARG ARTIFACT_LOCATION="https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz"
-
-
-RUN set -x ; \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y upgrade && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y install dh-make-perl libmodule-cpanfile-perl git wget && \
-  apt-file update
-
-RUN set -x ; \
-  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "$ARTIFACT_LOCATION" && \
-  tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
-  rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
-  cd /srv/ledgersmb && \
-  ( ( for lib in $( cpanfile-dump --with-all-features --recommends --no-configure --no-build --no-test ) ; \
-    do \
-      if dh-make-perl locate "$lib" 2>/dev/null ; \
-      then  \
-        : \
-      else \
-        echo no : $lib ; \
-      fi ; \
-    done ) | grep -v dh-make-perl | grep -v 'not found' | grep -vi 'is in Perl ' | cut -d' ' -f4 | sort | uniq | tee /srv/derived-deps ) && \
-  cat /srv/derived-deps
-
-
-#
-#
-#  The real image build starts here
-#
-#
-
-
-FROM  $SRCIMAGE
-LABEL org.opencontainers.image.authors="LedgerSMB project <devel@lists.ledgersmb.org>"
-
-ARG LSMB_VERSION="1.9.4"
-ARG LSMB_DL_DIR="Releases"
-ARG ARTIFACT_LOCATION="https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz"
-
 
 # Install Perl, Tex, Starman, psql client, and all dependencies
 # Without libclass-c3-xs-perl, performance is terribly slow...
+# Without libclass-accessor-lite-perl, HTML::Entities won't build from CPAN
+# libnet-cidr-lite-perl is a dependency for Plack::Builder::Conditionals
+#   which is being installed from CPAN
+# libtest-requires-perl is a dependency of Module-Build-Pluggable-PPPort
+#   on which HTML::Escape depends
 
 # Installing psql client directly from instructions at https://wiki.postgresql.org/wiki/Apt
 # That mitigates issues where the PG instance is running a newer version than this container
-# Install Locale::Codes Locale::Country Locale::Language from CPAN to suppress
-# deprecation-as-core-module warning
 
-
-COPY --from=builder /srv/derived-deps /tmp/derived-deps
-
-RUN set -x ; \
-  echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
+# for Buster, add:
+#    libhtml-escape-perl \
+#    libplack-middleware-builder-conditionals-perl \
+#    libplack-request-withencoding-perl \
+#libversion-compare-perl
+RUN echo -n "APT::Install-Recommends \"0\";\nAPT::Install-Suggests \"0\";\n" >> /etc/apt/apt.conf && \
   mkdir -p /usr/share/man/man1/ && \
   mkdir -p /usr/share/man/man2/ && \
   mkdir -p /usr/share/man/man3/ && \
@@ -68,22 +29,43 @@ RUN set -x ; \
   mkdir -p /usr/share/man/man5/ && \
   mkdir -p /usr/share/man/man6/ && \
   mkdir -p /usr/share/man/man7/ && \
-  mkdir -p /usr/share/man/man8/ && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y upgrade && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y install \
+  DEBIAN_FRONTEND="noninteractive" apt-get update -q && \
+  DEBIAN_FRONTEND="noninteractive" apt-get dist-upgrade -y -q && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -y -q install \
     wget ca-certificates gnupg \
-    $( cat /tmp/derived-deps ) \
-    libclass-c3-xs-perl \
-    texlive-plain-generic texlive-latex-recommended texlive-fonts-recommended \
+    libcgi-emulate-psgi-perl libconfig-inifiles-perl \
+    libdbd-pg-perl libdbi-perl libdata-uuid-perl libdatetime-perl \
+    libdatetime-format-strptime-perl \
+    libio-stringy-perl \
+    libcpanel-json-xs-perl liblist-moreutils-perl \
+    liblocale-maketext-perl liblocale-maketext-lexicon-perl \
+    liblog-log4perl-perl libmime-lite-perl libmime-types-perl \
+    libmath-bigint-gmp-perl libmodule-runtime-perl libmoose-perl \
+    libmoosex-nonmoose-perl libnumber-format-perl \
+    libpgobject-perl libpgobject-simple-perl libpgobject-simple-role-perl \
+    libpgobject-type-bigfloat-perl libpgobject-type-datetime-perl \
+    libpgobject-type-bytestring-perl libpgobject-util-dbmethod-perl \
+    libpgobject-util-dbadmin-perl libplack-perl \
+    libplack-middleware-reverseproxy-perl \
+    libtemplate-perl libtext-csv-perl libtext-csv-xs-perl \
+    libtext-markdown-perl  libxml-simple-perl \
+    libnamespace-autoclean-perl \
+    libfile-find-rule-perl \
+    libtemplate-plugin-latex-perl libtex-encode-perl \
+    libclass-c3-xs-perl libclass-accessor-lite-perl \
+    libnet-cidr-lite-perl \
+    texlive-latex-recommended texlive-fonts-recommended \
     texlive-xetex fonts-liberation \
+    starman \
+    libopenoffice-oodoc-perl \
+    ssmtp \
     lsb-release && \
   echo "deb http://apt.postgresql.org/pub/repos/apt/ $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list && \
   (wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | apt-key add -) && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y update && \
-  DEBIAN_FRONTEND="noninteractive" apt-get -y install postgresql-client && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -q -y update && \
+  DEBIAN_FRONTEND="noninteractive" apt-get -q -y install postgresql-client && \
   DEBIAN_FRONTEND="noninteractive" apt-get -q -y install git cpanminus make gcc libperl-dev && \
-  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "$ARTIFACT_LOCATION" && \
+  wget --quiet -O /tmp/ledgersmb-$LSMB_VERSION.tar.gz "https://download.ledgersmb.org/f/$LSMB_DL_DIR/$LSMB_VERSION/ledgersmb-$LSMB_VERSION.tar.gz" && \
   tar -xzf /tmp/ledgersmb-$LSMB_VERSION.tar.gz --directory /srv && \
   rm -f /tmp/ledgersmb-$LSMB_VERSION.tar.gz && \
   cpanm --notest \
@@ -93,8 +75,9 @@ RUN set -x ; \
     --installdeps /srv/ledgersmb/ && \
   apt-get purge -q -y git cpanminus make gcc libperl-dev && \
   apt-get autoremove -q -y && \
-  apt-get clean -q && \
-  rm -rf ~/.cpanm/ /var/lib/apt/lists/* /usr/share/man/*
+  apt-get autoclean -q && \
+  rm -rf ~/.cpanm/ && \
+  rm -rf /var/lib/apt/lists/* /usr/share/man/*
 
 
 WORKDIR /srv/ledgersmb
@@ -103,27 +86,30 @@ WORKDIR /srv/ledgersmb
 
 # Configure outgoing mail to use host, other run time variable defaults
 
-## MAIL
-ENV LSMB_MAIL_SMTPHOST 172.17.0.1
-#ENV LSMB_MAIL_SMTPPORT 25
-#ENV LSMB_MAIL_SMTPSENDER_HOSTNAME (container hostname)
-#ENV LSMB_MAIL_SMTPTLS
-#ENV LSMB_MAIL_SMTPUSER
-#ENV LSMB_MAIL_SMTPPASS
-#ENV LSMB_MAIL_SMTPAUTHMECH
+## sSMTP
+ENV SSMTP_ROOT ar@example.com
+ENV SSMTP_MAILHUB 172.17.0.1
+ENV SSMTP_HOSTNAME 172.17.0.1
+#ENV SSMTP_USE_STARTTLS
+#ENV SSMTP_AUTH_USER
+#ENV SSMTP_AUTH_PASS
+ENV SSMTP_FROMLINE_OVERRIDE YES
+#ENV SSMTP_AUTH_METHOD
 
-## DATABASE
 ENV POSTGRES_HOST postgres
 ENV POSTGRES_PORT 5432
 ENV DEFAULT_DB lsmb
 
 COPY start.sh /usr/local/bin/start.sh
+COPY update_ssmtp.sh /usr/local/bin/update_ssmtp.sh
 
-RUN chmod +x /usr/local/bin/start.sh && \
+RUN chown www-data /etc/ssmtp /etc/ssmtp/ssmtp.conf && \
+  chmod +x /usr/local/bin/update_ssmtp.sh /usr/local/bin/start.sh && \
   mkdir -p /var/www
 
 # Work around an aufs bug related to directory permissions:
-RUN mkdir -p /tmp && chmod 1777 /tmp
+RUN mkdir -p /tmp && \
+  chmod 1777 /tmp
 
 # Internal Port Expose
 EXPOSE 5762

README.md

@@ -4,10 +4,9 @@ Dockerfile for LedgerSMB Docker image
 
 # Supported tags
 
-- `1.9`, `1.9.x`, `latest` - Latest official release from the 1.9 branch
-- `1.8`, `1.8.x` - Latest official release from the 1.8 branch
-- `1.7`, `1.7.x` - Latest official release from 1.7 branch
-- `1.6`, `1.6.33` - Last official release from 1.6 branch 
+- `1.8` - Preview version for the 1.8 branch
+- `1.7`, `1.7.x`, `latest` - Latest official release from 1.7 branch
+- `1.6`, `1.6.x` - Latest official release from 1.6 branch 
 - `1.5`, `1.5.30` - Last official release from 1.5 branch
 - `1.4`, `1.4.42` - Last official release from 1.4 branch
 - `master` - Master branch from git, unstable
@@ -72,7 +71,7 @@ The database username and password are:
 ```
 
 From here, follow the steps as detailed in the instructions for
-[preparing for first use](https://ledgersmb.org/content/preparing-ledgersmb-19-first-use).
+[preparing for first use](https://ledgersmb.org/content/preparing-ledgersmb-17-first-use).
 
 ## Manual installation
 
@@ -149,6 +148,30 @@ affect the performance experience of users.
 
 ## Mail configuration
 
+### Before 1.8.0
+
+These variables are used to set outgoing SMTP defaults.
+
+* `SSMTP_ROOT` (config: `Root` -- DEPRECATED)
+* `SSMTP_MAILHUB` (config: `Mailhub`)
+* `SSMTP_HOSTNAME` (config: `Hostname`)
+* `SSMTP_USE_STARTTLS` (config: `UseSTARTTLS`)
+* `SSMTP_AUTH_USER` (config: `AuthUser`)
+* `SSMTP_AUTH_PASS` (config: `AuthPass`)
+* `SSMTP_AUTH_METHOD` (config: `AuthMethod` -- DEPRECATED)
+* `SSMTP_FROMLINE_OVERRIDE` (config: `FromLineOverride` -- DEPRECATED)
+
+`SSMTP_MAILHUB` defaults to the default docker0 interface, so if your host is
+already configured to relay mail, this should relay successfully with only
+the root and hostname set.
+
+Use the other environment variables to relay mail through a different host.
+Use the [ssmtp.conf man
+page](https://www.systutorials.com/docs/linux/man/5-ssmtp.conf/) to look up
+the meaning and function of each of the mail configuration keys.
+
+### 1.8.0 and higher (under development)
+
 As of 1.8.0, the image is based on Debian Buster instead of Debian Stretch;
 with Buster, the `ssmtp` program has been removed from Debian, this image
 had to change strategy. The main application always came with built-in e-mail
@@ -181,8 +204,9 @@ please contact us on the [mailing list](http://ledgersmb.org/topic/support/maili
 or through a [GitHub issue](https://github.com/ledgersmb/ledgersmb-docker/issues).
 
 You can also reach some of the official LedgerSMB maintainers via the
-[Matrix](https://matrix.org) room in [#ledgersmb:matrix.org](https://matrix.to/#/#ledgersmb:matrix.org).
-The [Element](https://app.element.io/#/room/#ledgersmb:matrix.org) Matrix client is highly recommended.
+`#ledgersmb` IRC channel on [Freenode](https://freenode.net), or on the
+bridged [Matrix](https://matrix.org) room in [#ledgersmb:matrix.org](https://matrix.to/#/#ledgersmb:matrix.org).
+The [Riot.im](https://riot.im/app/#/room/#ledgersmb:matrix.org) Matrix client is highly recommended.
 
 
 ## Contributing

docker-compose.yml

@@ -16,7 +16,7 @@ services:
   # because that allows us to use the default hostname ("postgres")
   # from the LedgerSMB configuration
   postgres:
-    image: postgres:12-alpine
+    image: postgres:9.6-alpine
     environment:
       # Replace the password below for a secure setup
       POSTGRES_PASSWORD: abc
@@ -28,18 +28,12 @@ services:
   lsmb:
     depends_on:
       - postgres
-    image: ledgersmb/ledgersmb:1.9
+    image: ledgersmb/ledgersmb:1.7
     networks:
       - internal
       - default
-    # Comment the 'ports' section to disable mapping the LedgerSMB container port (5762)
-    #  to the host's port of the same number, thus making LedgerSMB
-    #  available on http://<host-dns-or-ip>:5762/
-    #     SECURITY NOTE: Do this for evaluation purposes only!
-    #       In production, be sure to use SSL/TLS to protect user's passwords
-    #       and other sensitive data
     ports:
-      - "5762:5762"
+      - "127.0.0.1:5762:5762"
     environment:
       # The LSMB_WORKERS environment variable lets you select the number
       # of processes serving HTTP requests. The default number of 2 workers
@@ -58,15 +52,6 @@ services:
       # SSMTP_AUTH_METHOD:
       # SSMTP_USE_STARTTLS:
       # SSMTP_FROMLINE_OVERRIDE:
-      #
-      #
-      # The PROXY_IP environment variable lets you set the IP address
-      # (range) of the reverse proxy used for TLS termination, which forwards
-      # its requests to this container. When this reverse proxy runs on the
-      # Docker host, the default below applies. In case the reverse proxy is
-      # hosted in a separate container, this setting needs to be adjusted.
-      #
-      # PROXY_IP: 172.17.0.1/12
 
 # having the dbdata volume is required to persist our
 # data between PostgreSQL container updates; without

start.sh

@@ -1,107 +1,33 @@
 #!/bin/bash
 
+update_ssmtp.sh
 cd /srv/ledgersmb
 
-if [[ -n "$SSMTP_ROOT" ]]; then
-    echo "\$SSMTP_ROOT set; parameter is deprecated and will be ignored"
-    LSMB_HAVE_DEPRECATED=1
-fi
-if [[ -n "$SSMTP_FROMLINE_OVERRIDE" ]]; then
-    echo "\$SSMTP_FROMLINE_OVERRIDE set; parameter is deprecated and will be ignored"
-    LSMB_HAVE_DEPRECATED=1
-fi
-if [[ -n "$SSMTP_MAILHUB" ]]; then
-    echo "\$SSMTP_MAILHUB set; parameter is deprecated"
-    if [[ -z "$LSMB_MAIL_SMTPHOST" ]]; then
-        echo "  Deriving \$LSMB_MAIL_SMTPHOST setting from \$SSMTP_MAILHUB"
-        LSMB_MAIL_SMTPHOST=${SSMTP_MAILHUB%:*}
-    fi
-    if [[ -z "$LSMB_MAIL_SMTPPORT" ]]; then
-        echo "  Deriving \$LSMB_MAIL_SMTPPORT setting from \$SSMTP_MAILHUB"
-        LSMB_MAIL_SMTPPORT=${SSMTP_MAILHUB#*:}
-    fi
-    LSMB_HAVE_DEPRECATED=1
-fi
-if [[ -n "$SSMTP_HOSTNAME" ]]; then
-    echo "\$SSMTP_HOSTNAME set; parameter is deprecated"
-    if [[ -z "$LSMB_MAIL_SMTPSENDER_HOSTNAME" ]]; then
-        echo "  Deriving \$LSMB_MAIL_SMTPSENDER_HOSTNAME setting from \$SSMTP_HOSTNAME"
-        LSMB_MAIL_SMTPSENDER_HOSTNAME=$SSMTP_HOSTNAME
-    fi
-    LSMB_HAVE_DEPRECATED=1
-fi
-if [[ -n "$SSMTP_USE_STARTTLS" ]]; then
-    echo "\$SSMTP_USE_STARTTLS set; parameter is deprecated"
-    if [[ -z "$LSMB_MAIL_SMTPTLS" ]]; then
-        echo "  Deriving \$LSMB_MAIL_SMTPSENDER_HOSTNAME setting from \$SSMTP_USE_STARTTLS"
-        LSMB_MAIL_SMTPTLS=$SSMTP_USE_STARTTLS
-    fi
-    LSMB_HAVE_DEPRECATED=1
-fi
-if [[ -n "$SSMTP_AUTH_USER" ]]; then
-    echo "\$SSMTP_AUTH_USER set; parameter is deprecated"
-    if [[ -z "$LSMB_MAIL_SMTPUSER" ]]; then
-        echo "  Deriving \$LSMB_MAIL_SMTPUSER setting from \$SSMTP_AUTH_USER"
-        LSMB_MAIL_SMTPUSER=$SSMTP_AUTH_USER
-    fi
-    LSMB_HAVE_DEPRECATED=1
-fi
-if [[ -n "$SSMTP_AUTH_PASS" ]]; then
-    echo "\$SSMTP_AUTH_PASS set; parameter is deprecated"
-    if [[ -z "$LSMB_MAIL_SMTPPASS" ]]; then
-        echo "  Deriving \$LSMB_MAIL_SMTPPASS setting from \$SSMTP_AUTH_PASS"
-        LSMB_MAIL_SMTPPASS=$SSMTP_AUTH_PASS
-    fi
-    LSMB_HAVE_DEPRECATED=1
-fi
-if [[ -n "$SSMTP_AUTH_METHOD" ]]; then
-    echo "\$SSMTP_AUTH_METHOD set; parameter is deprecated"
-    if [[ -z "$LSMB_MAIL_SMTPAUTHMECH" ]]; then
-        echo "  Deriving \$LSMB_MAIL_SMTPAUTHMECH setting from \$SSMTP_AUTH_METHOD"
-        LSMB_MAIL_SMTPAUTHMECH=$SSMTP_AUTH_METHOD
-    fi
-    LSMB_HAVE_DEPRECATED=1
-fi
-
-if [[ -n "$LSMB_HAVE_DEPRECATED" ]]; then
-    echo "!!! DEPRECATED \$SSMTP_* PARAMETERS WILL BE REMOVED in the 1.9 image!!!"
-fi
-
-
 if [[ ! -f ledgersmb.conf ]]; then
   cat <<EOF >/tmp/ledgersmb.conf
 [main]
 cache_templates = 1
+
 [database]
 host = $POSTGRES_HOST
 port = $POSTGRES_PORT
 default_db = $DEFAULT_DB
+
 [mail]
-${LSMB_MAIL_SMTPHOST:+smtphost=$LSMB_MAIL_SMTPHOST
-}${LSMB_MAIL_SMTPPORT:+smtpport=$LSMB_MAIL_SMTPPORT
-}${LSMB_MAIL_SMTPSENDER_HOSTNAME:+smtpsender_hostname=$LSMB_MAIL_SMTPSENDER_HOSTNAME
-}${LSMB_MAIL_SMTPTLS:+smtptls=$LSMB_MAIL_SMTPTLS
-}${LSMB_MAIL_SMTPUSER:+smtpuser=$LSMB_MAIL_SMTPUSER
-}${LSMB_MAIL_SMTPPASS:+smtppass=$LSMB_MAIL_SMTPPASS
-}${LSMB_MAIL_SMTPAUTHMECH:+smtpauthmech=$LSMB_MAIL_SMTPAUTHMECH
-}
-[proxy]
-ip=${PROXY_IP:-172.17.0.1/12}
+sendmail   = /usr/sbin/ssmtp
+
 EOF
   export LSMB_CONFIG_FILE='/tmp/ledgersmb.conf'
 fi
 
+if [ ! -d "/tmp/ledgersmb" ]; then
+  mkdir -p /tmp/ledgersmb
+fi
+
 # start ledgersmb
 # --preload-app allows application initialization to kill the entire
 # starman instance (instead of just the worker, which will immediately
-# get restarted) on error; it also has a positive effect on memory use
+# get restarted); it also has a positive effect on memory use
 
-echo '--------- LEDGERSMB CONFIGURATION:  ledgersmb.conf'
-cat ${LSMB_CONFIG_FILE:-ledgersmb.conf}
-echo '--------- LEDGERSMB CONFIGURATION --- END'
-
-# ':5762:' suppresses an uninitialized variable warning in starman
-# the last colon means "don't connect using tls"; without it, there's a warning
-exec starman --listen :5762: --workers ${LSMB_WORKERS:-5} \
-             -I lib -I old/lib \
-             --preload-app bin/ledgersmb-server.psgi
+exec starman --port 5762 --workers ${LSMB_WORKERS:-5} -I lib -I old/lib \
+        --preload-app bin/ledgersmb-server.psgi

update_ssmtp.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+ConfiguredComment='# install script update_ssmtp.sh has configured ssmtp'
+grep -qc "$ConfiguredComment" /etc/ssmtp/ssmtp.conf && {
+    echo "smtp configured."
+    exit
+}
+
+sed -i \
+    -e "s/\(root=\).*\$/\1$SSMTP_ROOT/g" \
+    -e "s/\(mailhub=\).*\$/\1$SSMTP_MAILHUB/g" \
+    -e "s/\(hostname=\).*\$/\1$SSMTP_HOSTNAME/g" \
+    /etc/ssmtp/ssmtp.conf
+[ -z "$SSMTP_USE_STARTTLS" ] || echo "UseSTARTTLS=$SSMTP_USE_STARTTLS" >> /etc/ssmtp/ssmtp.conf
+[ -z "$SSMTP_AUTH_USER" ] || echo "AuthUser=$SSMTP_AUTH_USER" >> /etc/ssmtp/ssmtp.conf
+[ -z "$SSMTP_AUTH_PASS" ] || echo "AuthPass=$SSMTP_AUTH_PASS" >> /etc/ssmtp/ssmtp.conf
+[ -z "$SSMTP_AUTH_METHOD" ] || echo "AuthMethod=$SSMTP_AUTH_METHOD" >> /etc/ssmtp/ssmtp.conf
+[ -z "$SSMTP_FROMLINE_OVERRIDE" ] || echo "FromLineOverride=$SSMTP_FROMLINE_OVERRIDE" >> /etc/ssmtp/ssmtp.conf
+echo "$ConfiguredComment" >> /etc/ssmtp/ssmtp.conf